The product was added to your Comparison list

Brass Nut-Washers - (100% Customized)
Brass Nut-Washers - (100% Customized)
1 x AED 0.00
Comparison list
Your location
+(971) 6-535-05-56
13
0Cart

Newest

Sort by:
Price: High to Low
128
Jet Diffuser, Ring Type, Aluminum, AJD-P
0.0
AJD-P
Airmaster Jet Diffusers are highly efficient air delivery systems suitable for large spaces with high ceilings, such as concert halls and theaters. The diffusers can deliver a high stream of air over long distances and can be adjusted to control the direction of air flow. They are available in various sizes and colors and can be fixed directly to the round ductwork.
Brand NameAir Master MaterialAluminum
Contact us for a price
In stock
Rectangular Ceiling Diffuser, Extruded Aluminum, ACD4R+D
0.0
ACD4R+D
The Rectangular Ceiling Diffuser (ACD4R+D) features high quality extruded aluminum construction for durability and resistance to corrosion. It has a coned design that deflects air in four directions and includes an opposed blade damper for optimal air flow control.
Brand NameAir Master MaterialAluminum
Contact us for a price
In stock
Swirl Diffuser, Adjustable, ASD-A
0.0
ASD-A
The Swirl Diffuser (ASD-A) is a high-quality air diffuser made of aluminum and plastic blades that allows for manual adjustment of air flow direction. Its slotted circular face design and powder-coated finish make it a visually appealing solution for high ceiling applications of up to 4.5m.
Brand NameAir Master MaterialAluminum, Plastic
Contact us for a price
In stock
Aluminum Square Ceiling Diffuser , ACD4+D
0.0
ACD4+D
Square Ceiling Diffuser made of high-quality aluminum with a louvered core for maximum flexibility in installation, maintenance and damper adjustment. Available in one, two, and three-way discharge patterns.
Brand NameAir Master MaterialAluminum
Contact us for a price
In stock
Stainless Steel Square Ceiling Diffuser
0.0
The Stainless Steel Square Ceiling Diffuser is made from high-quality aluminum sheets with an extruded aluminum profile frame, making it both corrosion resistant and rigid. It has an adjustable opposed blade damper for air flow control and foam gasket for air leak prevention. It can be easily installed in lay-in type ceiling.
Contact us for a price
In stock
Square Decorative Diffusers
0.0
Square Decorative Diffusers are unique, aesthetically designed grilles and diffusers for building/room interiors. They are available in custom designs, finishes and sizes.
Contact us for a price
In stock
Round Ceiling Diffuser Adjustable Core, Aluminum, ARD
0.0
ARD
The Round Ceiling Diffuser Adjustable Core (ARD) is a high-quality diffuser made of aluminum or steel sheet construction with corrosion resistance and rigidity. It features adjustable cones for horizontal and vertical airflow and is suitable for ceiling or exposed duct mounting.
Brand NameAir Master MaterialAluminum
Contact us for a price
In stock
Jet Diffuser- Eye Ball Type, Aluminum, AJD
0.0
AJD
Frame and spout:  High quality aluminum sheet. Standard finishes: Powder coated color finish as per RAL color codes. Flexibility of finishing available as option. Airmaster eye ball Jet Nozzle Diffusers are highly suitable for delivering a high stream of air over long distances. Its...
Brand NameAir Master MaterialAluminum
Contact us for a price
In stock
Round Diffuser Fixed Core, Steel, ARDF+D
0.0
ARDF+D
Airmaster Round Diffuser with Fixed Core is made of high quality steel and aluminum construction, providing a horizontal air pattern. It's available with a black powder coated butterfly damper and removable core for easy access and maintenance.
Brand NameAir Master MaterialSteel
Contact us for a price
In stock
Disc Valve, Steel, ADV
0.0
ADV
Air Master disc valves are made from high quality galvanized steel sheet construction and offer an alternative to traditional ceiling diffusers for ventilation applications. The air flow can be easily adjusted by rotating the disc. Disc valves are ideal for low air flow rates and are recommended for exhaust in damp areas like toilets and kitchens.
Brand NameAir Master MaterialSteel
Contact us for a price
In stock
Access Doors With Piano Type Hinged Door
0.0
MEP-ADP
MEP-Global offers access doors with piano type hinged doors, made from high-quality galvanized steel sheet with internal insulation of 25 mm thick fibre glass for thermal and acoustic insulation. Available in various sizes from 150 x 150 mm to 600 x 600 mm, these access doors are ideal for use in air conditioning plant rooms, plenums, air handling units, and near fire dampers.
Contact us for a price
In stock
Access Doors With Removable Door Frame
0.0
MEP-ADR
MEP-Global offers access doors with removable door frames made from high-quality galvanized steel sheet. The door panels are internally insulated with 25 mm thick fibre glass for thermal and acoustic insulation. With sizes ranging from 150 x 150 mm to 600 x 600 mm, these access doors are ideal for use in air conditioning plant rooms, plenums, air handling units, and near fire dampers.
Contact us for a price
In stock
Fire Damper – AFD 3
0.0
AFD 3
AFD 3 is a high-quality fire damper designed to automatically close upon detection of heat, restricting the passage of fire and maximizing occupants' safety. It is constructed with a galvanized iron sheet frame, interlocking type blades, and UL listed fusible links with a fire rating of 165°F/212°F.
Contact us for a price
In stock
Motorized Fire Damper – AMFD
0.0
AMFD
The Motorized Fire Damper - AMFD is a device installed in air distribution systems or air transfer openings that closes automatically when heat is detected, interrupting airflow and restricting the passage of fire. It is designed to maintain the integrity of fire-rated walls and barriers, and its construction is made with high-quality materials to ensure rattle-free operation. It is UL 555 classified and manufactured under strict quality control procedures, making it a reliable solution for occupant safety.
Contact us for a price
In stock
Motorized Fire & Smoke Damper – AMFSD
0.0
AMFSD
Airmaster's Motorized Fire & Smoke Damper or Combination Fire and Smoke Damper is designed to ensure maximum occupant safety. The damper is constructed with high-quality galvanized iron sheets and has a fast-acting two-position Honeywell actuator, making it reliable for controlling airflow in a fire-rated HVAC system.
Contact us for a price
In stock
Motorized Smoke Damper – AMSD
0.0
AMSD
AMSD is a motorized smoke damper designed to automatically close upon detection of smoke in air distribution systems or air transfer openings, restricting the passage of fire and maximizing occupant safety.
Contact us for a price
In stock
Gas Tight Damper – AGTD (B)
0.0
AGTD (B)
Frame: High-quality Galvanized Steel sheet (Z-275) of thickness 2mm Frame size: 180mm depth and standard flange height of 35mm Blades: Single skin 3-V blades, Galvanized steel of 2mm thickness Drive Shaft: Electroplated square rod of size12.7mmx 12.7mm Bushings: Self-lubricating S.S Ball bearing...
Contact us for a price
In stock
Gas Tight Damper (Aero foil Blade) – AGTD (AB)
0.0
AGTD (AB)
Product Features: Ultra-Low Leakage Extremely Heavy-duty construction and smooth operation Designed for use in hazardous areas with ATEX rated Explosion-proof actuators with quick close functionality Double skin Aerofoil blades Flame-retardant silicone gaskets Available in SS 316, SS 304,...
Contact us for a price
In stock
Volume Control Damper – AVCD
0.0
AVCD
Construction: Frame: High-quality Galvanized Steel sheet of thickness 1.2mm as standard. Frame size: 125mm depth and standard flange height of 25mm. Blades: Double skinned high quality extruded Aluminium aerofoil profiles. Driveshaft: Electro-plated square rod of size 12.7mm x 12.7mm....
Contact us for a price
In stock
Pressure Relief Damper – APRD
0.0
APRD
Frame and blades:  Galvanized steel Blade supports:   SS shafts and brass bushes A pressure relief damper is an HVAC damper used in areas experiencing a build of pressure and requiring the release of this excess pressure at regular intervals, in one direction. The release of...
Contact us for a price
In stock
Non Return Damper – ANRD
0.0
ANRD
Frame: High-quality extruded aluminum profile with 30 mm flange width as standard. 12, 16, and 24 mm flange widths are optional. Blades: Extruded Aluminium profile Blade supports Self-oiling nylon bushings with 8 mm diameter aluminum rods. Blade seals: Foam gasket for air tightness. Blade...
Contact us for a price
In stock
Motorized Volume Control Damper – AVCD-M
0.0
AVCD-M
Frame:   High quality Galvanized Steel sheet of thickness 1.2mm as standard. Frame Size:   125mm depth and standard flange height of 35mm. Blades:   Double skinned high quality extruded Aluminum aero foil profiles. Drive Shaft:   Electro-plated square rod of size 12.7mm x 12.7mm. Bushings:...
Contact us for a price
In stock
Circular Volume Control Damper – AVCD-C
0.0
AVCD-C
Frame: High quality Galvanized Steel. Bearing pins: Electro plated square rod of size of 10mmØ with square transition of size 12.7mm x 12.7mm. Handle: Galvanized Steel locking hand quadrant. Bushings: Self-lubricating S.S Ball bearing. Volume Control damper is widely used in heating,...
Contact us for a price
In stock
GI Volume Control Damper – AVCD-GI
0.0
AVCD-GI
Frame: High quality Galvanized Steel sheet of thickness 1.2mm as standard. Frame Size: 125mm depth and standard flange height of 25mm. Blades: Single skinned 3-V type G.I blade of 1.2mm thickness. Drive Shaft: Electro plated square rod of size 12.7mm x 12.7mm. Bushings: Self-lubricating nylon...
Contact us for a price
In stock
Low Leakage Volume Control Damper – AVCD-ZL
0.0
AVCD-ZL
Frame: High quality Galvanized Steel sheet of thickness 1.2mm as standard. Frame Size: 125mm depth and standard flange height of 25mm. Blades: Double skinned heavy duty extruded Aluminium profiles. Drive Shaft: Electro plated square rod of size 12.7mm x 12.7mm. Bushings: Self-lubricating nylon...
Contact us for a price
In stock
Heavy Duty Volume Control Damper – AVCD-HD
0.0
AVCD-HD
Frame:   High quality Galvanized Steel sheet of thickness 1.2mm. Frame Size:   180mm depth and 30mm flange height. Blades:  Double skinned aero foil blades made from galvanized steel with 165mm blade spacing. Drive Shaft:   Electro plated rod of size 14mmØ. Bushings:  Sintered,...
Contact us for a price
In stock
Pre-Insulated Volume Control Damper – AVCD-PI
0.0
AVCD-PI
Frame: 20mm thick polyurethane material with 2-sides Aluminum foil facing. Frame Size: 200mm depth with flanges for side-fixing. Blades: Double skinned high quality extruded Aluminum aero foil profiles. Drive Shaft: Electro plated square rod of size 12.7mm x 12.7mm. Bushing: Self-lubricating...
Contact us for a price
In stock
Stainless Steel Volume Control Damper – AVCD-SS
0.0
AVCD-SS
Frame: High quality Stainless Steel sheet (Grade 304/316L) of thickness 1.2mm depending on size Frame Size: 125mm depth and standard flange height of 25mm. Blades: Single skin ridge shaped blade constructed out of 1.2mm thick S.S sheet as standard. Drive Shaft: S.S square rod of size 12.7mm x...
Brand NameAir Master MaterialStainless Steel
Contact us for a price
In stock
Slip & Clip Volume Control Damper – AVCD-SC
0.0
AVCD-SC
Frame: High quality Galvanized Steel sheet of thickness 0.9mm as standard. Frame size: 200mm depth. Blades: Double skinned high quality extruded aluminum aero foil profiles. Drive Shaft: Electro-plated square rod of size 12.7mm x 12.7mm Volume Control damper is widely used in heating,...
Contact us for a price
In stock
Sound Attenuators – Crosstalk-ACT
0.0
ACT
Casing:  High quality galvanized steel sheet of 0.9mm thickness (standard); up to 1.2mm for bigger sizes. Splitters/Baffles:  Construction using high quality perforated galvanized steel sheet of 0.7mm thickness.200mm splitter width is standard. Acoustic Media:  Inorganic ,fire...
Contact us for a price
In stock
Sound Attenuator – Circular – ACL
0.0
ACL
Casing:  High quality galvanized steel sheet of 0.9mm thickness (standard); up to 1.2mm for bigger sizes. Splitters/Pod:  Centre splitter (Pod) construction using high quality perforated galvanized steel sheet of 0.7mm thickness. Acoustic Media:  Inorganic ,fire resistant , vermin and...
Contact us for a price
In stock
Sound Attenuators – Rectangular – ARL
0.0
ARL
Casing:  High quality galvanized steel sheet of 0.9mm thickness (standard); up to 1.2mm for bigger sizes. Splitters/Baffles:  “Bull-Nose” construction using high quality perforated galvanized steel sheet of 0.7mm thickness.200mm splitter width is standard. Acoustic...
Contact us for a price
In stock
By Pass VAV (Variable Air Volume Terminals) – ABV
0.0
ABV
Casing:  High quality galvanized steel sheet of 0.9 mm thickness By-Pass Balancing damper: 0.9mm field adjustable balancing damper on the bypass outlet. Actuator:  0-10 V, Modulating actuator. Acoustic Media:  Interior surface of unit casing is acoustically and thermally lined...
Contact us for a price
In stock
Pressure Independent VAV With Heater(Variable Air Volume Terminals) APV-H
0.0
APV-H
What is a VAV terminal? A VAV terminal modulates the supply airflow at constant temperature into an occupied space based on cooling demand. As the load increases the supply of cool air increases and as the load decreases the air supply also decreases. It consists of a thermostat, actuator,...
Contact us for a price
In stock
Pressure Independent VAV(Variable Air Volume Terminals) – APV
0.0
APV
Casing:  High quality galvanized steel sheet of 0.9 mm thickness Airflow sensor:  Multipoint differential pressure flow grid Actuator:  0-10 V, Modulating actuator. Acoustic Media:  Interior surface of unit casing is acoustically and thermally lined with ½ inch, 32 kg/m³ density glass fibre...
Contact us for a price
In stock
Architectural Louver, Aluminum, ARCL
0.0
ARCL
Blades: High-Quality aluminum profile Airofoil blades of thickness 1.2mm Frame: Aluminum frame or G.I frame based on design Architectural louvers are used to enhance elegance due to its aesthetically appealing features and provide protection from direct sunlight. Standard Finishes:...
Brand NameAir Master MaterialAluminum
Contact us for a price
In stock
Drum Louver, Aluminum – ADL
0.0
ADL
Frame :  Constructed with high quality extruded aluminum profiles. Drum :   Aluminum sheet and specially shaped extruded aluminum profiles. Blades:   High quality extruded aluminum adjustable directional blades. Damper:   Opposed blade damper made with aluminum profiles. Drum louver is...
Brand NameAir Master MaterialAluminum
Contact us for a price
In stock
Drainable Blade Louver , Aluminum – ADBL
0.0
ADBL
Frame and blades: High quality extruded aluminum profile. Flange width: 30 mm standard. Flange depth: 100 mm Airmaster ADBL model louvers are designed for superior air and water penetration performance combined with solid-looking appearance. Extruded aluminium profiles to make ADBL model...
Brand NameAir Master MaterialAluminum
Contact us for a price
In stock
Sand Trap Louver – Flush Mounted – AFSTL
0.0
AFSTL
Natural anodized aluminum finish. Powder coated colour finish as Per RAL-colour code. Flexibility of finish available as option. Sand trap louvers are an integral part of any air handling unit, usually installed at the first point of air intake. As the name of the product states, sand trap...
Contact us for a price
In stock
Acoustic Louver - AAL
0.0
AAL
Frame:  High quality G.I sheets (Z275g) of thickness 1.2mm as standard. Blade:  Double skin, flat blade design, 0.9mm exterior surface and 0.9mm perforated interior surface, G.I construction. Insulation:  48kg/m3 density, 50mm thick high-quality rock wool insulation with facing Airmaster...
Contact us for a price
In stock
Sand Trap Louver High Efficiency – ASTL- HE
0.0
ASTL- HE
Frame: 2mm thick extruded aluminum formed sheets. Blades: 6063 high grade aluminum blade 2mm thick. Sand Chute: 1.5 mm thick aluminum sheet. Sand trap louvers are an integral part of any air handling unit, usually installed at the first point of air intake. As the name of the product states,...
Contact us for a price
In stock
Fresh Air Louver – AFL
0.0
AFL
Frame and blades:  High quality extruded aluminum profile of 1.2mm thickness Blade pitch:  40 mm standard Flange width:  30mm standard Filter Frame:  Aluminum Filter Media:  Aluminum Media of thickness 25mm as standard Fresh air louver are mainly used in the fresh air intake  system...
Contact us for a price
In stock
Sand Trap Louvers With Filter – ASTL+F
0.0
ASTL+F
Sand trap louvers are available with optional accessories such as bird screen, insect screen, aluminum mesh filter, volume control damper. The above model is available with 1” or 2” aluminum mesh filter, and synthetic filters are also available. Sand trap louvers are an integral part of any...
Contact us for a price
In stock
Stainless Steel Sand Trap Louvers, ASTL-S.S
0.0
ASTL-S.S
Sand trap louvers are an integral part of any air handling unit, usually installed as the first unit at the first point of air intake. As the name of the product states, sand trap louvers prevents the sand from entering the air intake unit or equipment rooms, thus avoiding a damage to the...
Contact us for a price
In stock
Exhaust Louver Hood (Weather Hood or Canopy )
0.0
MEP-ELH
Weather protection hood for exhaust fans, louvers, and grills Construction: Galvanized, Stainless Steel, Aluminum Options : Decorative finish (powder coated) Bird protection mesh Mosquito protection screen
Contact us for a price
In stock
Sand Trap Louvers – ASTL
0.0
ASTL
Sand trap louvers are an integral part of any air handling unit, usually installed as the first unit at the first point of air intake. As the name of the product states, sand trap louvers prevents the sand from entering the air intake unit or equipment rooms, thus avoiding a damage to the...
Contact us for a price
In stock
Exhaust Air Louver – AL
0.0
AL
Construction: Frame and blades:  High quality extruded aluminum profile of 1.2mm thickness Blade pitch:  40 mm standard Flange width:  30mm standard  Exhaust air louver are mainly used in the ventilation system of a building. The fixed blades of a louver are arranged in such a way that...
Contact us for a price
In stock
Stainless Steel Fresh Air Louver, AFL-S.S
0.0
AFL-S.S
Frame and blades:  High quality extruded aluminum profile of 1.2mm thickness Blade pitch:  40 mm standard Flange width:  30mm standard Filter Frame:  Aluminum Filter Media:  Aluminum Media of thickness 25mm as standard Airmaster Emirates is the manufacturers & suppliers of Stainless...
Contact us for a price
In stock
Sand Trap Louvers With Dampers – ASTL+D
0.0
ASTL+D
Construction: Frame and blades:  1.5mrn and 1.2 mm thick high quality extruded aluminum profiles. Bird screen:  12 mm x 12 mm x 1 mm diameter GI wire mesh as standard. 12 rim x 12 mm x 1.5 mm diameter aluminum wire mesh as option. Drain:  20 mm diameter self drain holes at the bottom of the...
Contact us for a price
In stock
Brass Bathroom Accessories - (100% Customized)
0.0
MEP Global offers fully customized Brass Bathroom Accessories with electroplating options in Nickel, Chrome, Tin, Copper, and more. Raw material test certificate provided with each supply.
Contact us for a price
In stock
Brass Bushing For Transformer - (100% Customized)
0.0
Custom-made Brass Bushing for Transformers available at MEP-global.com. We manufacture and export Brass, Lead Free, Copper, and Bronze components with in-house casting and forging facilities.
Contact us for a price
In stock
Brass Forged Components - (100% Customized)
0.0
Get 100% customized Brass Forged Components with electroplating, polishing, and testing services at Mep-global.com
Contact us for a price
In stock
Brass Casting Components - (100% Customized)
0.0
MEP Global offers 100% customized Brass Casting Components with a variety of processes and material ranges to meet your specific needs.
Contact us for a price
In stock
Brass Fittings - (100% Customized)
0.0
Get fully customized Brass Fittings from MEP Global with in-house facilities for castings and forgings and RoHS compliant raw materials.
Contact us for a price
In stock
Brass HVAC Components - (100% Customized)
0.0
MEP Global offers 100% customized Brass HVAC Components with electroplating and material options like brass, copper, steel, and more.
Contact us for a price
In stock
Brass Inserts - (100% Customized)
0.0
Get 100% customized brass inserts at mep-global.com. Our manufacturing and exporting facilities ensure high-quality turning, forging, casting, and more.
Contact us for a price
In stock
Brass Lead Free Components - (100% Customized)
0.0
Mep-global.com offers 100% customized Brass Lead Free Components with Electroplating options, made with RoHs compliant raw materials.
Contact us for a price
In stock
Brass Neutral Bars - (100% Customized)
0.0
Get customized Brass Neutral Bars at MEP-Global.com, with in-house facilities for manufacturing and exporting Brass, Copper, Gun Metal, Phosphor Bronze, Steel, and Stainless Steel components.
Contact us for a price
In stock
Brass Nut-Washers - (100% Customized)
0.0
Get customized Brass Nut-Washers with electroplating options at mep-global.com. ISO 9001:2015 certified with in-house casting and forging facilities.
Contact us for a price
In stock
Brass Pipe fittings - (100% Customized)
0.0
Mep-global.com offers customized Brass Pipe fittings for various industrial applications. With in-house facilities for casting and forging, we ensure excellent quality and timely delivery.
Contact us for a price
In stock
Brass Pressure Components - (100% Customized)
0.0
Get high-quality Brass Pressure Components customized as per your drawings and material specifications, manufactured and exported by Mep-global.com.
Contact us for a price
In stock
Brass Sensor Components - (100% Customized)
0.0
Get high-quality, 100% customized Brass Sensor Components from MEP Global, the leading manufacturer and exporter of Brass, Copper, and Bronze components. With in-house facilities for castings and forgings, along with RoHs compliant raw materials, we deliver quality products worldwide.
Contact us for a price
In stock
Brass Slip Rings - (100% Customized)
0.0
Get 100% customized Brass Slip Rings from mep-global.com, made using high-quality raw materials and state-of-the-art processes.
Contact us for a price
In stock
Brass Spacers - (100% Customized)
0.0
Mep-global.com offers fully customized Brass Spacers manufactured and exported from India, with a range of materials and processing options.
Contact us for a price
In stock
Brass Terminals - (100% Customized)
0.0
MEP Global offers 100% customized Brass Terminals, with a range of material options and in-house facilities for casting and forging.
Contact us for a price
In stock
Brass Turned Components - (100% Customized)
0.0
Get 100% customized Brass Turned Components with MEP Global, India's trusted manufacturer and exporter of Brass, Copper, and Bronze components.
Contact us for a price
In stock
CNC Machined Components - (100% Customized)
0.0
MEP Global offers 100% customized CNC Machined Components in Brass, Copper, Gun Metal, and more, with RoHS compliant raw materials and in-house facilities for castings, forgings, and machining.
Contact us for a price
In stock
MULTICAL® 403, Kamstrup
0.0
TS 27.02 009
Fully programmable data logger with minute logger Configurable M-Bus modules with logger reading On-site configuration via front keys Highly flexible modular design Battery powered – battery lifetime 1) - 1 x C-cell/1 x D-cell/ 2 x A-cells – up to 16 years Flow range - qp 0.6…15 m³/h Flow...
Contact us for a price
In stock
SKM Decorative Split Air Conditioner 1.0 Ton - Efficient Cooling for Any Space
0.0
MSKM410A-12CEP5
Experience efficient cooling with the SKM Decorative Split Air Conditioner 1.0 Ton. Perfect for apartments, offices, hospitals, hotels, and sports halls, these sleek and compact indoor units blend seamlessly with any room decor. Designed with advanced components, they offer reliable cooling performance at high efficiencies and low noise levels. With models ranging from 1 TR to 3 TR and compliance with GCC regulations and standards, these split units are ideal for various applications. Enjoy the convenience of easy installation and operation, along with the assurance of a 5-year warranty on the compressor. Made in UAE for Gulf weather conditions
BTU12000 Refrigerant TypeR-410A Remote ControlYes
Contact us for a price
In stock
SKM Modular Air Handling Units for HVAC Solutions - MAH Series
0.0
SKM - MAH
Discover SKM's MAH Series Modular Air Handling Units (MAH) at MEP-Global.com. Designed to meet heating, ventilation, and air conditioning demands, these units consume less energy, generate minimal noise, and provide exceptional performance. Suitable for indoor and outdoor installations, they cater to a wide range of applications such as schools, commercial and residential buildings, hospitals, factories, hotels, and more. With ISO 9001 certification and endorsements from AHRI, Eurovent, and TUV, trust in the quality and reliability of SKM's MAH units for your HVAC needs.
Contact us for a price
In stock
SKM APCY-E Air Cooled Screw Chiller Series
0.0
SKM APCY-E
Introducing the SKM APCY-E Air Cooled Screw Chiller Series, delivering exceptional cooling performance for various applications. With a compact design and a wide range of models available, these chillers offer high efficiency, low noise operation, and reliable performance. Featuring advanced screw compressors, high heat transfer evaporators, and condenser coils, these chillers ensure optimum cooling efficiency. Designed to operate in a wide range of ambient temperatures, they are ideal for hotels, high-rise buildings, hospitals, and modern cooling applications. Experience sustainability and reliability with SKM's APCY-E Air Cooled Screw Chiller Series.
Contact us for a price
In stock
SKM Air Cooled Condensing Units for Efficient Cooling Solutions, ACUS-C Series - R407C
0.0
ACUS-C
Discover SKM's Air Cooled Condensing Units, designed for systems with indoor units connected to remote condensing units located outside. These units are ideal for commercial and industrial applications, offering high efficiency and reliable performance. With a wide range of capacities available, they are suitable for warehouses, schools, mosques, and more. SKM ensures that these condensing units meet international standards and are resilient to withstand the severe climatic conditions of the Gulf. Experience quiet operation, environmental friendliness, and maintenance-free operation with SKM Air Cooled Condensing Units.
Refrigerant TypeR407C
Contact us for a price
In stock
SKM Ducted Mini Split System - RX+DDP ESMA 50hz R410A - Top Discharge
0.0
RX+DDP
Introducing SKM Ducted Mini Split Systems, the perfect cooling solution for apartments, houses, offices, shops, small residences, and commercial establishments. These systems consist of two types: Top Discharge air delivery and Side Discharge delivery, both featuring high-efficiency performance...
Refrigerant TypeR-410A
Contact us for a price
In stock
Clevis Hanger, UL/FM Electrogalvanized
tembo
0.0
TGCH00ULE0022*
PRODUCT CODE NOMINAL IN. PIPE SIZE MM PIPE OD (MM) D MATERIAL HEIGHT H DIMENSION (MM) TOP HOLE DIA. S HANGER ROD SIZE (MM) R CROSS BOLT DIA. (CRD ) MAX LOAD (KG) TGCH00ULE0022* 1/ 2” DN15 21.3 68 11 M10 M8 350 TGCH00UFE0027 3/ 4” DN20 26.7 72 11 M10 M8 350...

Size Nominal (Inches):

1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" (More +2)
Brand NameTembo Country of OriginIndia MaterialMild Steel CertificationsUL Listed, FM Approved, ANSI/MSS SP-58 & SP-69(Type 1), Federal Specification WW-H-171E & A-A-1192A(Type 1) Size Nominal (Inches)1/2"
Contact us for a price
In stock
Sprinkler Hanger, Electrogalvanized
tembo
0.0
TGSHN000E0027
The Sprinkler Hanger is designed to provide vertical support to non-insulated piping systems, particularly for fire extinguishing pipe installations. It features a piece of mild steel shaped to support the pipe, offering double thickness at the support point. The hanger allows for pipe elevation adjustment by manipulating the position of the sprinkler nut on the hanger rod. Available in various sizes and finishes, including Plain, Electro-Galvanized, Hot Dip Galvanized, Zinc Flake, and Epoxy Coated, the Sprinkler Hanger is a reliable and durable solution for your piping support needs.

Size Nominal (Inches):

3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6" (More +3)
Brand NameTembo Country of OriginIndia MaterialMild Steel Size Nominal (Inches)3/4"
Contact us for a price
In stock
Pipe Hanger with EPDM Lining, Electrogalvanized
tembo
0.0
TGNC0L00E0027
The Pipe Hanger with EPDM Lining is recommended for supporting non-insulated stationary pipelines in a horizontal position. Constructed with mild steel and EPDM lining, it provides durability, noise reduction, and easy installation. Available in various sizes and finishes.

Size Nominal (Inches):

3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6" (More +3)
Brand NameTembo Country of OriginIndia MaterialMild Steel Size Nominal (Inches)3/4"
Contact us for a price
In stock
Pipe Hanger without Lining , Electrogalvanized
tembo
0.0
TGNC0000E0027
The Pipe Hanger without Lining, Electrogalvanized is designed to provide sturdy support for non-insulated stationary pipelines in a horizontal position. Made of mild steel, it offers durability and strength. Choose from various finishes.

Size Nominal (Inches):

3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6" (More +3)
Brand NameTembo Country of OriginIndia MaterialMild Steel Size Nominal (Inches)3/4"
Contact us for a price
In stock
U strap, Electrogalvanized
tembo
0.0
TGUS0000E0022
The U Strap, Electrogalvanized is designed to provide reliable support for piping systems vertically or horizontally to walls or ceilings. Made of mild steel, it offers durability and strength. Choose from various finishes.

Size Nominal (Inches):

1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" (More +8)
Brand NameTembo Country of OriginIndia MaterialMild Steel Size Nominal (Inches)1/2"
Contact us for a price
In stock
U bolt with 2 Nut and 2 Washer, Electrogalvanized
tembo
0.0
TGUB0000E0027
The U Bolt with 2 Nut and 2 Washer, Electrogalvanized is designed for securing piping to structural members while allowing axial movement. Made of mild steel, it provides strength and stability. Choose from various finishes.

Size Nominal (Inches):

3/4" 1/2" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" (More +9)
Brand NameTembo Country of OriginIndia MaterialMild Steel Rod Size10mm Size Nominal (Inches)3/4"
Contact us for a price
In stock
Heavy saddle, Electrogalvanized
tembo
0.0
TGHS0000E0022
The Heavy Saddle, Electrogalvanized is designed for supporting heavy-weight piping systems vertically or horizontally. Suitable for electrical and insulated pipes, it provides secure mounting and better gripping. Available in various sizes and finishes.

Size Nominal (Inches):

1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"
Brand NameTembo Country of OriginIndia MaterialMild Steel Size Nominal (Inches)1/2"
Contact us for a price
In stock
Light saddle, Electrogalvanized
tembo
0.0
TGLS0000E0022
APPLICATION: LIGHT SADDLE is recommended for supporting a piping system with vertically or horizontally to walls or ceilings. CONSTRUCTION: LIGHT SADDLE consists of single piece of mild steel shaped to the proper configuration as shown in the diagram. MATERIALS: Mild Steel. Also...

Size Nominal (Inches):

1/2" 3/4" 1" 1-1/4" 1-1/2" 2"
Brand NameTembo Country of OriginIndia MaterialMild Steel Size Nominal (Inches)1/2"
Contact us for a price
In stock
Clevis Hanger, Electrogalvanized
tembo
0.0
TGCH0000E0022
The Clevis Hanger, Electrogalvanized is designed to support sizable loads and allow elevation adjustment. Made from durable mild steel, it offers easy installation and a 15° swing for pipe feeding. Available in Electro-Galvanized finish.

Size Nominal (Inches):

1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" (More +4)
Brand NameTembo Country of OriginIndia MaterialMild Steel Size Nominal (Inches)1/2"
Contact us for a price
In stock
Sprinkler Hanger, UL/FM, Electrogalvanized
tembo
0.0
TGSHN0UFE0027
The Sprinkler Hanger, UL/FM, Electrogalvanized is designed to provide vertical support for non-insulated piping systems. It offers adjustable pipe elevation and is suitable for fire extinguishing pipe installation. Available in different finishes.

Size Nominal (Inches):

3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6" (More +3)
Brand NameTembo Country of OriginIndia MaterialMild Steel CertificationsANSI/MSS SP-58 & SP-69(Type 1), FM Approved, UL Listed, Federal Specification WW-H-171E & A-A-1192A(Type 1) Size Nominal (Inches)3/4"
Contact us for a price
In stock
Pipe Hanger with EPDM Lining, UL/FM, Electrogalvanized
tembo
0.0
TGNC0LUFE0027
The Pipe Hanger with EPDM Lining, UL/FM, Electrogalvanized is designed to support non-insulated stationary pipelines in a horizontal position. It features an EPDM lining for noise reduction. Available in various sizes and finishes.

Size Nominal (Inches):

3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6" (More +3)
Brand NameTembo Country of OriginIndia MaterialMild Steel Size Nominal (Inches)3/4"
Contact us for a price
In stock
Pipe Hanger without Lining, UL/FM, Electrogalvanized
tembo
0.0
TGNC00ULE0027
The Pipe Hanger without Lining, UL/FM, Electrogalvanized is designed for supporting non-insulated stationary pipelines in a horizontal position. Available in various finishes.

Size Nominal (Inches):

3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6" (More +3)
Brand NameTembo Country of OriginIndia MaterialMild Steel CertificationsUL Listed, FM Approved Size Nominal (Inches)3/4"
Contact us for a price
In stock
U strap, UL/FM, Electrogalvanized
tembo
0.0
TGUS00UFE0027
The U Strap, UL/FM, Electrogalvanized, is designed to provide vertical support to non-insulated piping systems. Available in various sizes and finishes.

Size Nominal (Inches):

3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6"
Brand NameTembo Country of OriginIndia MaterialMild Steel Size Nominal (Inches)3/4"
Contact us for a price
In stock
U strap with Lining, Electrogalvanized
tembo
0.0
TGUS0L00E0022
The U Strap with Lining, Electrogalvanized, is a standard pipe strap designed to support and restrain piping systems. Available in different sizes and finishes.

Size Nominal (Inches):

1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" (More +8)
Brand NameTembo Country of OriginIndia MaterialMild Steel Size Nominal (Inches)1/2"
Contact us for a price
In stock
Spring hanger
tembo
0.0
TGSPH02500010
Spring Hangers are specifically designed to isolate noise and vibration from suspended mechanical equipment. They are commonly used in applications such as air handling units, FCUs, cabinet fans, and proximity to rotating mechanical equipment. Constructed from mild steel with a variable spring, these hangers provide efficient vibration isolation.

Rated Load (KG):

10 15 20 40 60 100 160 200 300 400 (More +5)
Brand NameTembo Country of OriginIndia MaterialMild Steel Rated Load (KG)10
Contact us for a price
In stock
Closed Spring Mount
tembo
0.0
TGCSM00250060
The Closed Spring Mount is designed to reduce vibrations and prevent the transfer of excessive motion to the ground. It features a rubber-mounted base with a casting case and a variable spring for optimal performance. With color-coded springs, powder coating, and various load ranges, this mount offers stability and protection for your machinery.

Rated Load (KG):

60 100 160 200 300 400 500 250 600 800 (More +2)
Brand NameTembo Country of OriginIndia MaterialMild Steel Rated Load (KG)60
Contact us for a price
In stock
U bolt with 2 Nut and 2 Washer, UL, Electrogalvanized
tembo
0.0
TGUB00ULE0027
The U Bolt with 2 Nut and 2 Washer is designed to provide vertical support and restrict lateral movement in piping systems. With its longer straight threaded length and two standard hex nuts, it offers secure connections. Made from mild steel and available in various finishes.

Size Nominal (Inches):

3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6" (More +3)
Brand NameTembo Country of OriginIndia MaterialMild Steel Size Nominal (Inches)3/4"
Contact us for a price
In stock
Rubber Support Insert - 19MM
tembo
0.0
TGRSI00221925
The Rubber Support Insert - 19mm is designed to be placed at supporting points of insulated pipes, preventing insulation crushing. Available in various sizes and made from high-quality neoprene or compounded rubber.

Size Nominal (Inches):

1/2" X 19MM X 25MM 3/4" X 19MM X 25MM 1" X 19MM X 25MM 1-1/4" X 19MM X 25MM 1-1/2" X 19MM X 25MM 2" X 19MM X 25MM 2-1/2" X 19MM X 25MM 3" X 19MM X 38MM 4" X 19MM X 38MM 5" X 19MM X 38MM (More +4)
Brand NameTembo Country of OriginIndia Size Nominal (Inches)1/2" X 19MM X 25MM
Contact us for a price
In stock
Draw in Anchors, Electrogalvanized
tembo
0.0
TGDWA00E00650
MEP-Global offers a selection of reliable and durable draw in anchors for secure fixings in concrete and other materials. These heavy-duty metal fixings are designed with large bolts that are anchored in a metal housing or shield. They provide exceptional strength, stability, and load-bearing capacity for a wide range of applications. Choose from sizes starting from M6 up to M24 to suit your specific requirements. Our draw in anchors are available in materials such as mild steel and stainless steel, ensuring durability and corrosion resistance. The electrogalvanized finish further enhances the longevity of the anchors. Trust MEP-Global for high-quality draw in anchors that deliver reliable and long-lasting performance.

Size Nominal (Inches):

M6 X 50MM M8 X 55MM M12 X 90MM M10 X 65MM
Brand NameTembo Country of OriginIndia MaterialMild Steel Size Nominal (Inches)M6 X 50MM
Contact us for a price
In stock
Wedge Anchor, Electrogalvanized
tembo
0.0
TGWDA00E00650
Wedge Anchors are the perfect solution for fixing supports in concrete. These anchors are installed by inserting them into a pre-drilled hole and expanding the wedge by tightening the nut. Constructed from mild steel or stainless steel, they provide a secure and reliable anchor point.

Size Nominal (Inches):

M6 X 50MM M8 X 60MM M8 X 100MM M10 X 75MM M10 X 100MM M12 X 100MM M12 X 120MM M16 X 150MM
Brand NameTembo Country of OriginIndia MaterialMild Steel CertificationsETA Approved Size Nominal (Inches)M6 X 50MM
Contact us for a price
In stock
Drop in Anchor, Electrogalvanized
tembo
0.0
TGDPA000E0625
The Drop-In Anchor is a low profile, female threaded anchor designed for fixing threaded rods or studs in ceilings or concrete slabs. Made from durable mild steel or stainless steel, these anchors provide excellent strength and stability. The electrogalvanized finish enhances corrosion resistance.

Size Nominal (Inches):

M6 X 25MM M8 X 30MM M10 X 40MM M12 X 50MM M16 X 60MM
Brand NameTembo MaterialMild Steel Size Nominal (Inches)M6 X 25MM
Contact us for a price
In stock
Beam Clamp, Electrogalvanized
tembo
0.0
TGBC000ME0008
The Beam Clamp is designed for secure structural attachment to the top or bottom of metal beams, purlins, channels, or angle iron. Made from strong and durable ductile iron, these clamps feature a hardened steel cup point set screw and lock nut for reliable fastening. The electrogalvanized finish provides corrosion resistance.

Size Nominal (Inches):

M8 M10 M12
Brand NameTembo Country of OriginIndia MaterialDuctile Iron CertificationsFederal Specification A-A-1192A (Type 19 & 23) WW-H-171-E (Type 23), MSS-SP-69 (Type 19 & 23) Size Nominal (Inches)M8
Contact us for a price
In stock
Rubber Support Insert - 32MM
tembo
0.0
TGRSI00223225
MEP-Global offers a reliable and durable 32mm rubber support insert designed to prevent the crushing of insulation in supporting points of insulated pipes. These inserts are dimensionally accurate and molded to provide excellent resistance to deterioration and distortion. Crafted from high-quality neoprene or compounded rubber, they offer effective insulation and vibration dampening. With a density of 1400kg/m3 and a low thermal conductivity of 0.16W/m°C, these support inserts provide optimal thermal insulation for enhanced energy efficiency. They can withstand temperatures ranging from -20°C to 110°C, making them suitable for a wide range of applications. Choose MEP-Global for high-quality rubber support inserts that ensure the long-term performance of your insulated pipes.

Size Nominal (Inches):

1/2" X 32MM X 25MM 3/4" X 32MM X 25MM 1" X 32MM X 25MM 1-1/4" X 32MM X 25MM 1-1/2" X 32MM X 25MM 2" X 32MM X 25MM 2-1/2" X 32MM X 38MM 3" X 32MM X 38MM 4" X 32MM X 38MM 5" X 32MM X 38MM (More +4)
Brand NameTembo Country of OriginIndia Size Nominal (Inches)1/2" X 32MM X 25MM
Contact us for a price
In stock
Threaded rod, Electrogalvanized, length 3 meter
tembo
0.0
TGTR00ME00600
Our threaded rods are designed for supporting ducting systems and piping racks. Available in various materials and finishes, they offer durability and strength. Choose from a wide range of sizes and threads to meet your specific requirements.

Size Nominal (Inches):

M6 M8 M10 M12 M16 M20
Brand NameTembo Country of OriginIndia MaterialMild Steel Size Nominal (Inches)M6
Contact us for a price
In stock
Hex Bolts, Electrogalvanized
tembo
0.0
TGSS000000000
Hex Bolts are threaded fasteners with a hexagonal head designed to hold and tighten materials or join two objects together. These bolts have external male standard threads that require a matching pre-formed female thread, such as a nut. With options for various thread types and a wide range of sizes, including metric and imperial measurements, our hex bolts are available in different materials and finishes for diverse applications.

Size Nominal (Inches):

M6 X 25MM M8 X 30MM M10 X 40MM M12 X 50MM M16 X 75MM M20 X 100MM
Brand NameTembo Country of OriginIndia Size Nominal (Inches)M6 X 25MM
Contact us for a price
In stock
Hex Nuts, Electrogalvanized
tembo
0.0
TGHN000000000
MEP-Global offers a wide range of electrogalvanized hex nuts to meet your fastening requirements. Our selection includes standard hex nuts, heavy hex nuts, hex coupling nuts, nylon lock nuts, spring nuts, dome nuts, and wing nuts. These nuts are available in various materials, such as mild steel, carbon steel, alloy steel, and stainless steel. With different finishes, including plain, electro-galvanized, hot dip galvanized, zinc flake, yellow, cadmium, and nickel, you can choose the right nut for your specific application. We provide hex nuts in sizes ranging from M6 to M64 in metric series and 1/4" to 2-1/2" in imperial measurements. Custom sizes can be manufactured upon request. Our hex nuts conform to international standards, such as ASTM/ASME, BS, DIN, BS EN ISO, and JIS, and come in various grades to meet your specific needs.

Size Nominal (Inches):

M6 M8 M10 M12 M16 M20
Brand NameTembo Country of OriginIndia Size Nominal (Inches)M6
Contact us for a price
In stock
Washer, Electrogalvanized
tembo
0.0
TGFW000000000
MEP-Global provides a comprehensive range of electrogalvanized washers to meet your fastening needs. Our selection includes flat washers, which are thin plates with holes that are used to distribute the load from threaded fasteners, such as bolts or nuts, over a larger area. These washers are essential for achieving even load distribution, preventing surface damage, and increasing stability in your fastening system. Available in materials like mild steel, carbon steel, alloy steel, and stainless steel, our washers are suitable for various applications. Choose from sizes starting from M6 (1/4" UNC) up to M36 (2-1/2" UNC). To meet different requirements, our washers come in different finishes, including plain, electro-galvanized, hot dip galvanized, zinc flake, yellow, cadmium, and nickel. Trust MEP-Global for high-quality washers that ensure reliable and secure fastening.

Size Nominal (Inches):

M6 M8 M10 M12 M16 M20
Brand NameTembo Country of OriginIndia Size Nominal (Inches)M6
Contact us for a price
In stock
Rubber Support Insert - 25MM
tembo
0.0
TGRSI00222525
Our 25mm rubber support inserts are designed to prevent the crushing of insulation in supporting points of insulated pipes. With excellent resistance to deterioration and distortion, they provide reliable protection. Available in various sizes to suit your needs.

Size Nominal (Inches):

1/2" X 25MM X 25MM 3/4" X 25MM X 25MM 1" X 25MM X 25MM 1-1/4" X 25MM X 25MM 1-1/2" X 25MM X 25MM 2" X 25MM X 25MM 2-1/2" X 25MM X 38MM 3" X 25MM X 38MM 4" X 25MM X 38MM 5" X 25MM X 38MM (More +4)
Brand NameTembo Country of OriginIndia Size Nominal (Inches)1/2" X 25MM X 25MM
Contact us for a price
In stock
BrushBeast DR Duct Cleaning Machine
0.0
MEP-RB-BBDR
The BrushBeast DR Duct Cleaning Machine revolutionizes air duct cleaning with its cutting-edge smart technology, direct drive system, and unmatched vacuum power. With advanced features, energy efficiency, and portability, it sets a new industry standard. Upgrade your duct cleaning capabilities with the BrushBeast DR.
Brand NameRotobrush Country of OriginUnited States of America
Contact us for a price
In stock
Rotobrush aiR+, Duct Cleaning Machine
0.0
MEP-RB-AIRPLUS
The Rotobrush aiR+ Air Duct Cleaning Machine is the industry leader, renowned for its powerful vacuum, advanced patented design, and exceptional cleaning performance. Its brush and vacuum system effectively removes debris, while the adjustable handle and large-diameter rear wheels enhance portability. Upgrade your cleaning equipment with the Rotobrush aiR+.
Brand NameRotobrush Country of OriginUnited States of America
Contact us for a price
In stock
Rotobrush BrushBeast Air Duct Cleaning Machine
0.0
MEP-RB-BB
The Rotobrush BrushBeast with Speed Tray Carrier is a powerful and portable air duct cleaning machine. With a 90% increase in vacuum power, advanced filter bag design, and durable construction, it removes heavy build-up within duct systems. The SpeedTray carrier provides easy access to brushes and accessories. Upgrade your air duct cleaning capabilities with the BrushBeast and achieve cleaner, healthier air.
Brand NameRotobrush Country of OriginUnited States of America
Contact us for a price
In stock
Rotobrush aiR+ XP Air Duct Cleaning Machine
0.0
MEP-RB-AIR-XP
The Rotobrush aiR+ XP is a powerful air duct cleaning machine designed for enhanced efficiency. With increased vacuum power, adjustable handle, and durable construction, it makes duct cleaning a breeze.
Contact us for a price
In stock
BlowBeast Negative Air Machine
0.0
MEP-RB-BB-NAM
The BlowBeast Negative Air Machine is a compact and portable solution designed to effectively remove airborne dust and pollutants from air duct systems. With its superior air flow and high vacuum power, it provides unmatched performance. Get yours today from MEP-Global.com.
Brand NameRotobrush Country of OriginUnited States of America
Contact us for a price
In stock
R5000 Negative Air Machine
0.0
MEP-RB-NAMR5000
The R5000 Negative Air Machine is a versatile and powerful solution designed for air duct cleaning and remediation work. With its lightweight and portable design, all-metal construction, and high-performance vacuum system, it offers unmatched performance. Get yours today from MEP-Global.com.
Brand NameRotobrush Country of OriginUnited States of America
Contact us for a price
In stock
i2cam Video Inspection Camera
0.0
MEP-RB-I2CAM
The i2cam Video Inspection Camera is a must-have tool for contractors who want to stay competitive in the duct cleaning market. With its portable and lightweight design, LCD color monitor, and LED lighted camera head, it provides a clear picture of customers' duct work. Offer video duct inspection services and increase your sales. Available on MEP-Global.com.
Brand NameRotobrush Country of OriginUnited States of America
Contact us for a price
In stock
Roto-Vision Video Monitor
0.0
MEP-RB-RV-VM
LIGHTING - 12 adjustable LED lights to reduce reflection off the ducts. DURATION - 7 hour battery life SCREEN SIZE - 7- inch LCD flat screen monitor lets you see deep inside the air ducts or dryer vents. MISC - Industrial strength carrying case, high-res still picture during video, and...
Brand NameRotobrush Country of OriginUnited States of America
Contact us for a price
In stock
Thermostat Guard Universal Compatibility - AC Thermostat Cover with Lock
0.0
BTG-EK
Our Thermostat Guard with Lock Box Cover is the perfect solution for protecting your thermostat settings and decreasing energy bills. Made from durable transparent plastic, it provides clear visibility while preventing tampering. Easy to install and compatible with most thermostats, this lockable cover ensures consistent temperature control.
Contact us for a price
In stock
Rubber hanger
tembo
0.0
TGRH000000010
Achieve optimal suspension and vibration isolation with our durable Rubber Hanger. Perfect for fan coil units, pipes, ducts, brackets, and light-weight equipment. Customizable sizes available.

Rated Load (KG):

10 20 30 50 70 120
Brand NameTembo Country of OriginIndia MaterialMild Steel Rated Load (KG)10
Contact us for a price
In stock
Duct Mount
tembo
0.0
TGDM0S0000025
Ensure vibration-free operation with our Duct Mount Anti-Vibration Isolator. Perfect for fan coil units, pipes, ducts, brackets, and light-weight equipment. Customizable sizes available.

Rated Load (KG):

25 50 100
Brand NameTembo Country of OriginIndia Rated Load (KG)25
Contact us for a price
In stock
Metal Sandwich Pad
tembo
0.0
TGMSP78003003
Effectively suppress noise, vibration, and impact with our Metal Sandwich Pad. Ideal for machinery applications, preventing vibrations from reaching the floor or ground. Various sizes available.

Size Nominal (Inches):

7/8’’ X 3’’ X 3’’ 7/8’’ X 4’’ X 4’’ 7/8’’ X 6’’ X 6’’ 7/8’’ X 8’’ X 8’’ 7/8’’ X 12’’ X 12’’ 7/8’’ X 18’’ X 18’’
Brand NameTembo Country of OriginIndia Size Nominal (Inches)7/8’’ X 3’’ X 3’’
Contact us for a price
In stock
Cork Sandwich Pad
tembo
0.0
TGCSP78003003
Suppress noise, vibration, and impact with our Cork Sandwich Pad. Designed for machinery applications, it ensures a quieter and stable environment. Various sizes available.

Size Nominal (Inches):

7/8’’ X 3’’ X 3’’ 7/8’’ X 4’’ X 4’’ 7/8’’ X 6’’ X 6’’ 7/8’’ X 8’’ X 8’’ 7/8’’ X 12’’ X 12’’ 7/8’’ X 18’’ X 18’’
Brand NameTembo Country of OriginIndia Size Nominal (Inches)7/8’’ X 3’’ X 3’’
Contact us for a price
In stock
Heavy duty anti vibration Rubber pad 18'' x 18'' x 3/4" Waffle Type
tembo
0.0
TGWP034018018
Experience optimal vibration isolation with our Heavy Duty Anti-Vibration Rubber Pad in a waffle type design. Designed for heavy-duty machinery, it provides superior stability and noise reduction.
Brand NameTembo Size Nominal (Inches)3/4’’ x 18’’ x 18’’
Contact us for a price
In stock
Heavy duty anti vibration Ribbed Mounting Pad
tembo
0.0
TGRMP38003003
Suppress noise, vibration, and impact with our Heavy Duty Anti-Vibration Ribbed Mounting Pad. Designed for machinery applications, it offers excellent vibration absorption and impact resistance. Various sizes available.

Size Nominal (Inches):

3/8’’ X 3’’ X 3’’ 3/8’’ X 4’’ X 4’’ 3/8’’ X 6’’ X 6’’ 3/8’’ X 8’’ X 8’’ 3/8’’ X 12’’ X 12’’ 3/8’’ X 18’’ X 18’’
Brand NameTembo Country of OriginIndia Size Nominal (Inches)3/8’’ X 3’’ X 3’’
Contact us for a price
In stock
Dielectric Union FPT X MPT,180°F (82°C), 25 bar (362 psi), Electrogalvanized
tembo
0.0
TGDEUFM000042
Connect female NPT iron pipe thread to female brass pipe threads with our reliable Dielectric Union. Constructed with durable materials for high-temperature and high-pressure applications.

Size Nominal (Inches):

1-1/4" 1/2" 3/4" 1" 1-1/2" 2"
Brand NameTembo Country of OriginIndia Size Nominal (Inches)1-1/4"
Contact us for a price
In stock
Dielectric Union FPT Steel X FPT Brass, 180°F (82°C), 25 bar (362 psi),Electrogalvanized
tembo
0.0
TGDEUFF000022
Connect female NPT iron pipe thread to female brass pipe threads with our reliable Dielectric Union. Constructed with durable materials for high-temperature and high-pressure applications.

Size Nominal (Inches):

1/2" 3/4" 1" 1-1/4" 1-1/2" 2"
Brand NameTembo Country of OriginIndia Size Nominal (Inches)1/2"
Contact us for a price
In stock
Dielectric Union FPT Steel X FPT Brass Weld,180°F (82°C), 25 bar ( 362 psi), Electrogalvanized
tembo
0.0
TGDEUFW000022
Connect female NPT iron pipe thread to female brass pipe threads with our reliable Dielectric Union. Designed for weld connection and built for high-temperature and high-pressure applications.

Size Nominal (Inches):

1/2" 3/4" 1" 1-1/4" 1-1/2" 2"
Brand NameTembo Country of OriginIndia Size Nominal (Inches)1/2"
Contact us for a price
In stock
Valve Plate Assembly Carlyle (Carrier) for Models 5F20, 5F30, CMP Part Number PLT-0630
0.0
PLT-0630
The PLT-0630 Valve Plate Assembly is a genuine Carlyle (Carrier) compressor part designed for models 5F20 and 5F30. It guarantees precision and durability, meeting the highest industry standards.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCarrier-Carlyle Compressor Spare-Part TypeValve Plate Model Family5F, 5F20, 5F30
Contact us for a price
In stock
Valve Plate Assembly Carlyle (Carrier) for Model 06E, CMP Part Number PLT-0651F
0.0
PLT-0651F
The PLT-0651F Valve Plate Assembly is a high-efficiency solution for Carlyle (Carrier) compressor model 06E. With two oblong discharge ports per cylinder, it enhances refrigerant flow, improving overall efficiency and performance.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCarrier-Carlyle Compressor Spare-Part TypeValve Plate Model Family06E 099, 06E 150, 06E 165, 06E 166, 06E 175, 06E 199, 06E 250, 06E 265, 06E 266, 06E 275, 06E 299, 06E
Contact us for a price
In stock
Valve Plate Assembly Carlyle (Carrier) for Models 05D, 05G, 05K, CMP Part Number PLT-0673
0.0
PLT-0673
The PLT-0673 Valve Plate Assembly is a flat disc solution designed for Carlyle (Carrier) compressor models 05D, 05G, and 05K. This  part optimizes refrigerant flow, enhancing overall efficiency and performance.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCarrier-Carlyle Compressor Spare-Part TypeValve Plate Model Family05G37, 05G41, 05K-12, 05K-24, 06DR 237, 06DR 241, 05D, 05G, 05K
Contact us for a price
In stock
Valve Plate Assembly Carlyle (Carrier) for Models 05G, CMP Part Number PLT-0675
0.0
PLT-0675
The PLT-0675 Valve Plate Assembly is a flat hot gas bypass solution crafted for Carlyle (Carrier) compressor model 05G. With OEM part numbers 17-44050-00 and 17-44106-00, this assembly ensures optimal performance and efficiency.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCarrier-Carlyle Compressor Spare-Part TypeValve Plate Model Family05G37, 05G41, 05K-12, 05K-24, 06DR 237, 06DR 241, 05D, 05G
Contact us for a price
In stock
Valve Plate Assembly Carlyle (Carrier) for Models 9R, CMP Part Number PLT-1541
0.0
PLT-1541
Enhance the efficiency of your Copeland 9RS1 compressor with the PLT-1541 Valve Plate Assembly. This assembly, designed for the model "9RS1," ensures reliable performance and precise compatibility. Explore now at mep-global.com.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCarrier-Carlyle Compressor Spare-Part TypeValve Plate Model Family9RS, 9R
Contact us for a price
In stock
Valve Plate Assembly Copeland for Models 4R, 6R, CMP Part Number PLT-1552
0.0
PLT-1552
Enhance the efficiency of your Copeland compressors with the PLT-1552 Valve Plate Assembly. Designed for models "4RA, 4RE (20 HP)" and "6RA, 6RB, 6RE, 6RN (30 HP)," this OEM assembly ensures precise compatibility and reliable operation. Explore now at mep-global.com.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCopeland Compressor Spare-Part TypeValve Plate Model Family4R, 4RA, 6RA, 4RE, 6RB, 6RE, 6RN, 6R
Contact us for a price
In stock
Valve Plate Assembly Copeland for Models 4D,6D,8D, CMP Part Number PLT-1625
0.0
PLT-1625
Enhance the efficiency of your Copeland compressors with the PLT-1625 Disc Type Valve Plate Assembly. Designed for models "4D, 6D, 8D" with a low-temperature unloading bank and floating suction reed, this OEM assembly ensures precise control for reliable operation. Explore now at mep-global.com.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCopeland Compressor Spare-Part TypeValve Plate Model Family4D, 4DC, 6D, 8DP, 4DA, 4DB, 4DE, 4DH, 4DJ, 4DK, 4DL, 4DN, 4DP, 4DR, 4DS, 4DT, 6DB, 6DC, 6DD, 6DE, 6DF, 6DG, 6DH, 6DJ, 6DK, 6DL, 6DM, 6DN, 6DP, 6DR, 6DS, 6DT, 6DY, 8D
Contact us for a price
In stock
Valve Plate Assembly Copeland for Models 4D, 6D, CMP Part Number PLT-1635
0.0
PLT-1635
Upgrade your Copeland compressors with the PLT-1635 Disc Type Valve Plate Assembly. Designed for models "4D, 6D" featuring a low-temperature unloading bank and riveted suction reeds, this OEM assembly ensures peak performance in challenging low-temperature conditions. Explore the reliability of Copeland compressor parts at mep-global.com.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCopeland Compressor Spare-Part TypeValve Plate Model Family4D, 4DC, 6D, 8DP, 4DA, 4DB, 4DE, 4DH, 4DJ, 4DK, 4DL, 4DN, 4DP, 4DR, 4DS, 4DT, 6DB, 6DC, 6DD, 6DE, 6DF, 6DG, 6DH, 6DJ, 6DK, 6DL, 6DM, 6DN, 6DP, 6DR, 6DS, 6DT, 6DY, 8D
Contact us for a price
In stock
Valve Plate Assembly Bitzer for Models 4P, CMP Part Number PLT-2336
0.0
PLT-2336
Enhance Bitzer compressors with the PLT-2336 Valve Plate Assembly, tailored for models 4P with a 65mm bore. This OEM assembly, identified by part number 304063-06, guarantees precision and efficiency, making it an ideal choice for compressor upgrades. Find it exclusively on mep-global.com.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerBitzer Compressor Spare-Part TypeValve Plate Model Family4P, 4PC
Contact us for a price
In stock
Show another 16 products