The product was added to your Comparison list

Maun Wad Punch Set With Centre Punch Metric or Imperial (5 to 32mm)
1 x AED 202.18 ($55.09)
Comparison list
Your location
Vendor categories

Vendor productsProducts found: 187

Ask a question
Sort by:
from Z to A
128
YDK Series Air Condition Outdoor 48 Frame Fan Motor for fresh air ventilation system
0.0
YDK120-185-6
YDK Series 48 Frame Fan Motor for split air conditioner outdoor unit and fresh air ventilation system.
Brand NamePower Motors ColorGray Country of OriginChina FeaturesOutdoor Unit, 6 Pole, Single Shaft
Contact us for a price
In stock
Whale GP4618 Babyfoot Galley Pump (Foot Operated)
0.0
GP4618
The Whale Babyfoot Galley Pump is a self-priming, compact freshwater foot pump designed for easy operation in limited spaces. It connects to a ½-inch flexible hose and provides a maximum flow rate of 2.2 GPM. With its angled design and durable construction, it is suitable for both fresh and saltwater use. Install this foot-operated pump in your galley and effortlessly draw water for various applications.
AED 365.00 ($99.46)
(AED 383.25 ($104.43) inc tax)
In stock
+ −
Wedge Anchor, Electrogalvanized
tembo
0.0
TGWDA00E00650
Wedge Anchors are the perfect solution for fixing supports in concrete. These anchors are installed by inserting them into a pre-drilled hole and expanding the wedge by tightening the nut. Constructed from mild steel or stainless steel, they provide a secure and reliable anchor point.

Size Nominal (Inches):

M6 X 50MM M8 X 60MM M8 X 100MM M10 X 75MM M10 X 100MM M12 X 100MM M12 X 120MM M16 X 150MM
Brand NameTembo Country of OriginIndia MaterialMild Steel CertificationsETA Approved Size Nominal (Inches)M6 X 50MM
Contact us for a price
In stock
Washer, Electrogalvanized
tembo
0.0
TGFW000000000
MEP-Global provides a comprehensive range of electrogalvanized washers to meet your fastening needs. Our selection includes flat washers, which are thin plates with holes that are used to distribute the load from threaded fasteners, such as bolts or nuts, over a larger area. These washers are essential for achieving even load distribution, preventing surface damage, and increasing stability in your fastening system. Available in materials like mild steel, carbon steel, alloy steel, and stainless steel, our washers are suitable for various applications. Choose from sizes starting from M6 (1/4" UNC) up to M36 (2-1/2" UNC). To meet different requirements, our washers come in different finishes, including plain, electro-galvanized, hot dip galvanized, zinc flake, yellow, cadmium, and nickel. Trust MEP-Global for high-quality washers that ensure reliable and secure fastening.

Size Nominal (Inches):

M6 M8 M10 M12 M16 M20
Brand NameTembo Country of OriginIndia Size Nominal (Inches)M6
Contact us for a price
In stock
Vero Express Industrial Grade Cleaning Pad, Multipurpose, No Detergent Required 4"Length x 2-3/4"Width x 1-1/4" Thickness White Color
Vero
(Reviews: 2)
5
VEROEXP-PAD
Say goodbye to stubborn stains and smudges with Vero Express Industrial Grade Cleaning Pad. This multipurpose cleaning pad can clean most solid surfaces with just water and no detergent required, making it a safe and efficient cleaning alternative. Suitable for various applications, this extra-thick pad effortlessly lifts dirt and grime for a powerful cleaning that lasts a long time.
Brand NameVero ColorWhite
AED 5.00 ($1.36)
(AED 5.25 ($1.43) inc tax)
In stock
+ −

Minimum quantity for "Vero Express Industrial Grade Cleaning Pad, Multipurpose, No Detergent Required 4"Length x 2-3/4"Width x 1-1/4" Thickness White Color" is 10.

VENTS ТТ PRO Inline Mixed Flow Fan for Round Ducts
0.0
VENTS ТТ PRO 200
Discover the VENTS TT PRO Series, a range of high-performance ventilation fans designed to redefine your indoor air quality. Engineered with advanced features, these fans excel in providing powerful airflow, high pressure, and low noise levels. Ideal for bathrooms, kitchens, apartments, cottages, shops, and more, the VENTS TT PRO Series ensures top-notch ventilation in every space.
AED 464.00 ($126.43)
(AED 487.20 ($132.75) inc tax)
In stock
+ −
Add to cart
Valve Plate Assembly for Copeland Models L, N (3, 4, 5.0 HP), CMP Part Number PLT-1537
0.0
PLT-1537
Upgrade your Copeland compressors with the PLT-1537 Valve Plate Assembly, designed for models L and N (3, 4, 5.0 HP). Available exclusively on mep-global.com.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCopeland Compressor Spare-Part TypeValve Plate Model FamilyLAC, LAH, LAL, LAM, LWC, LWH, LWL, LWM, NRA, NRB, NRD, NRL, NRM, L, N
Contact us for a price
In stock
Valve Plate Assembly for Copeland Models (4RJ, 4RR, 6RJ, 6RR, 8RS), CMP Part Number PLT-1560
0.0
PLT-1560
Upgrade your Copeland compressors with the PLT-1560 Valve Plate Assembly, designed for models 4RJ, 4RR, 6RJ, 6RR, and 8RS. Available exclusively on mep-global.com.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCopeland Compressor Spare-Part TypeValve Plate Model Family4R, 4RJ, 4RR, 6RJ, 8RS, 6RR, 6R
Contact us for a price
In stock
Valve Plate Assembly for Copeland Medium Temperature Compressors, CMP Part Number PLT-1551
0.0
PLT-1551
Upgrade your Copeland medium temperature compressors with the PLT-1551 Valve Plate Assembly. Compatible with models 4R, 6R, and horsepower ratings of 15, 25, and 35. Available exclusively on mep-global.com.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCopeland Compressor Spare-Part TypeValve Plate Model Family4R, 4RH, 4RK, 6RH, 6RK, 6TM, 6RP, 8RP, 6R
Contact us for a price
In stock
Valve Plate Assembly for Copeland K Series Compressors, CMP Part Number PLT-1516
0.0
PLT-1516
Enhance your Copeland K series compressor with the PLT-1516 Valve Plate Assembly. Designed for models KAA, KAG, KAH, KAJ, KAK, KAL, KAM, KAN, and KAT, this assembly ensures precise fitment and compatibility. Available exclusively on mep-global.com.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCopeland Compressor Spare-Part TypeValve Plate Model FamilyKAA, KAG, KAH, KAJ, KAK, KAL, KAN, KAT, K
Contact us for a price
In stock
Valve Plate Assembly for Bitzer 4T Compressors, CMP Part Number PLT-2334
0.0
PLT-2334
Enhance your Bitzer 4T compressor with the PLT-2334 Valve Plate Assembly. Featuring a 60mm bore and OEM Part Numbers 304063-04, this assembly guarantees precision engineering and compatibility. Available exclusively on mep-global.com.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerBitzer Compressor Spare-Part TypeValve Plate Model Family4T, 4TC
Contact us for a price
In stock
Valve Plate Assembly for Bitzer 4 & 6 Cylinder Compressors, CMP Part Number PLT-2202
0.0
PLT-2202
Upgrade your Bitzer 4 & 6 Cylinder Compressors with the PLT-2202 Valve Plate Assembly. Designed for models M and J, this assembly ensures precise fitment and compatibility. Available exclusively on mep-global.com.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerBitzer Compressor Spare-Part TypeValve Plate Model Family4J, 4M.2, 6J, 6M.2
Contact us for a price
In stock
Valve Plate Assembly Copeland for Models 4RL, 6RL, CMP Part Number PLT-1549
0.0
PLT-1549
Enhance Copeland 4RL and 6RL compressors with the PLT-1549 Low-Temperature Valve Plate Assembly. Designed for low-temperature conditions, this assembly ensures optimal performance. Exclusively available on mep-global.com.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCopeland Compressor Spare-Part TypeValve Plate Model Family4RL, 6RL
Contact us for a price
In stock
Valve Plate Assembly Copeland for Models 4R,6R, CMP Part Number RTR-1561-250
0.0
RTR-1561-250
Enhance the reliability of your Copeland compressor with the RTR-1561-250 Valve Plate Retainer Pad. Specifically crafted for 4RR, 4RJ, 6RR, 6RJ, and 8RS models, this pack of 250 retainer pads ensures a steady and efficient performance. Available now on mep-global.com.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCopeland Compressor Spare-Part TypeValve Plate Model Family4R, 4RA, 6RA, 4RE, 6RB, 6RE, 6RN, 4RH, 4RJ, 4RK, 4RR, 6RF, 6RH, 6RJ, 6RK, 6RS, 6RT, 6TM, 8RS, 6R, 4RL, 6RL
Contact us for a price
In stock
Valve Plate Assembly Copeland for Models 4R, 6R, CMP Part Number PLT-1552
0.0
PLT-1552
Enhance the efficiency of your Copeland compressors with the PLT-1552 Valve Plate Assembly. Designed for models "4RA, 4RE (20 HP)" and "6RA, 6RB, 6RE, 6RN (30 HP)," this OEM assembly ensures precise compatibility and reliable operation. Explore now at mep-global.com.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCopeland Compressor Spare-Part TypeValve Plate Model Family4R, 4RA, 6RA, 4RE, 6RB, 6RE, 6RN, 6R
Contact us for a price
In stock
Valve Plate Assembly Copeland for Models 4D,6D,8D, CMP Part Number PLT-1625
0.0
PLT-1625
Enhance the efficiency of your Copeland compressors with the PLT-1625 Disc Type Valve Plate Assembly. Designed for models "4D, 6D, 8D" with a low-temperature unloading bank and floating suction reed, this OEM assembly ensures precise control for reliable operation. Explore now at mep-global.com.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCopeland Compressor Spare-Part TypeValve Plate Model Family4D, 4DC, 6D, 8DP, 4DA, 4DB, 4DE, 4DH, 4DJ, 4DK, 4DL, 4DN, 4DP, 4DR, 4DS, 4DT, 6DB, 6DC, 6DD, 6DE, 6DF, 6DG, 6DH, 6DJ, 6DK, 6DL, 6DM, 6DN, 6DP, 6DR, 6DS, 6DT, 6DY, 8D
Contact us for a price
In stock
Valve Plate Assembly Copeland for Models 4D, 6D, CMP Part Number PLT-1635
0.0
PLT-1635
Upgrade your Copeland compressors with the PLT-1635 Disc Type Valve Plate Assembly. Designed for models "4D, 6D" featuring a low-temperature unloading bank and riveted suction reeds, this OEM assembly ensures peak performance in challenging low-temperature conditions. Explore the reliability of Copeland compressor parts at mep-global.com.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCopeland Compressor Spare-Part TypeValve Plate Model Family4D, 4DC, 6D, 8DP, 4DA, 4DB, 4DE, 4DH, 4DJ, 4DK, 4DL, 4DN, 4DP, 4DR, 4DS, 4DT, 6DB, 6DC, 6DD, 6DE, 6DF, 6DG, 6DH, 6DJ, 6DK, 6DL, 6DM, 6DN, 6DP, 6DR, 6DS, 6DT, 6DY, 8D
Contact us for a price
In stock
Valve Plate Assembly Carlyle (Carrier)for Models 05G, CMP Part Number PLT-0671
0.0
PLT-0671
Enhance your Carlyle (Carrier) compressor's efficiency with the PLT-0671 Valve Plate Assembly. Tailored for 05G models, this assembly boasts a canted hot gas bypass (HGBP) side bank for improved performance. Exclusively available on mep-global.com.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCarrier-Carlyle Compressor Spare-Part TypeValve Plate Model Family05G
Contact us for a price
In stock
Valve Plate Assembly Carlyle (Carrier)for Models 06E, CMP Part Number PLT-0650
0.0
PLT-0650
Enhance the capabilities of your Carlyle (Carrier) 06E compressor with the PLT-0650 Valve Plate Assembly. This assembly, featuring hot gas bypass (HGBP) and unloading, along with 4 round discharge ports per cylinder, ensures optimal performance. Available exclusively on mep-global.com.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCarrier-Carlyle Compressor Spare-Part TypeValve Plate Model Family06E 099, 06E 150, 06E 165, 06E 166, 06E 175, 06E 199, 06E 250, 06E 265, 06E 266, 06E 275, 06E 299, 06E
Contact us for a price
In stock
Valve Plate Assembly Carlyle (Carrier) for Models 9R, CMP Part Number PLT-1541
0.0
PLT-1541
Enhance the efficiency of your Copeland 9RS1 compressor with the PLT-1541 Valve Plate Assembly. This assembly, designed for the model "9RS1," ensures reliable performance and precise compatibility. Explore now at mep-global.com.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCarrier-Carlyle Compressor Spare-Part TypeValve Plate Model Family9RS, 9R
Contact us for a price
In stock
Valve Plate Assembly Carlyle (Carrier) for Models 5H,6L, CMP Part Number PLT-0627
0.0
PLT-0627
Enhance Carlyle (Carrier) 5H and 6L series compressors with the PLT-0627 Valve Plate Assembly, designed for models 5H46-5H126. Featuring the trusted OEM Part Number 5H46-120A, this assembly guarantees optimal performance. Available only on mep-global.com.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCarrier-Carlyle Compressor Spare-Part TypeValve Plate Model Family5H126, 5H66, 5H46, 5H86, 5H, 6L
Contact us for a price
In stock
Valve Plate Assembly Carlyle (Carrier) for Models 5F20, 5F30, CMP Part Number PLT-0630
0.0
PLT-0630
The PLT-0630 Valve Plate Assembly is a genuine Carlyle (Carrier) compressor part designed for models 5F20 and 5F30. It guarantees precision and durability, meeting the highest industry standards.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCarrier-Carlyle Compressor Spare-Part TypeValve Plate Model Family5F, 5F20, 5F30
Contact us for a price
In stock
Valve Plate Assembly Carlyle (Carrier) for Models 06E, CMP Part Number PST-0601
0.0
PST-0601
Secure your Carlyle (Carrier) 06E compressor's optimal functionality with the PST-0601 Valve Plate. This check valve piston is tailored for Hot Gas Bypass (HGBP) valve plate assemblies and is available at a discounted price for a quantity of 25. Trust in its compatibility, performance, and cost-effectiveness.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCarrier-Carlyle Compressor Spare-Part TypeValve Plate Model Family06E 099, 06E 150, 06E 165, 06E 166, 06E 175, 06E 199, 06E 250, 06E 265, 06E 266, 06E 275, 06E 299, 06CC 550, 06CC 665, 06CC 899, 675, 06E
Contact us for a price
In stock
Valve Plate Assembly Carlyle (Carrier) for Models 05G, CMP Part Number PLT-0675
0.0
PLT-0675
The PLT-0675 Valve Plate Assembly is a flat hot gas bypass solution crafted for Carlyle (Carrier) compressor model 05G. With OEM part numbers 17-44050-00 and 17-44106-00, this assembly ensures optimal performance and efficiency.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCarrier-Carlyle Compressor Spare-Part TypeValve Plate Model Family05G37, 05G41, 05K-12, 05K-24, 06DR 237, 06DR 241, 05D, 05G
Contact us for a price
In stock
Valve Plate Assembly Carlyle (Carrier) for Models 05D, 05G, 05K, CMP Part Number PLT-0673
0.0
PLT-0673
The PLT-0673 Valve Plate Assembly is a flat disc solution designed for Carlyle (Carrier) compressor models 05D, 05G, and 05K. This  part optimizes refrigerant flow, enhancing overall efficiency and performance.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCarrier-Carlyle Compressor Spare-Part TypeValve Plate Model Family05G37, 05G41, 05K-12, 05K-24, 06DR 237, 06DR 241, 05D, 05G, 05K
Contact us for a price
In stock
Valve Plate Assembly Carlyle (Carrier) for Model 06E, CMP Part Number PLT-0651F
0.0
PLT-0651F
The PLT-0651F Valve Plate Assembly is a high-efficiency solution for Carlyle (Carrier) compressor model 06E. With two oblong discharge ports per cylinder, it enhances refrigerant flow, improving overall efficiency and performance.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerCarrier-Carlyle Compressor Spare-Part TypeValve Plate Model Family06E 099, 06E 150, 06E 165, 06E 166, 06E 175, 06E 199, 06E 250, 06E 265, 06E 266, 06E 275, 06E 299, 06E
Contact us for a price
In stock
Valve Plate Assembly Bitzer for Models 4F, CMP Part Number PLT-2392
0.0
PLT-2392
Optimize Bitzer 4F series compressors with the PLT-2392 Valve Plate Assembly, designed for a 41mm bore. With the trusted OEM Part Number 304059-02, this assembly guarantees precise and efficient operation. Available only on mep-global.com.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerBitzer Compressor Spare-Part TypeValve Plate Model Family4F, 4FC, 4FHC
Contact us for a price
In stock
Valve Plate Assembly Bitzer for Models 2E,4E (46mm Bore), CMP Part Number PLT-2391
0.0
PLT-2391
Boost the performance of Bitzer compressors with the PLT-2391 Valve Plate Assembly, tailored for models 2E4E with a 46mm bore. This OEM assembly, distinguished by part number 304059-01, delivers reliability and precision, making it a top choice for compressor enhancements. Discover it exclusively on mep-global.com.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerBitzer Compressor Spare-Part TypeValve Plate Model Family2E, 2EC, 4E, 4EC
Contact us for a price
In stock
Valve Plate Assembly Bitzer for Models 2C, 4C, CMP Part Number PLT-2394
0.0
PLT-2394
Optimize the performance of Bitzer compressors with the PLT-2394 Valve Plate Assembly, designed for models 2C and 4C featuring a 55mm bore. This OEM assembly, known by part number 304059-04, guarantees reliability and precision, making it a top choice for compressor upgrades. Available exclusively on mep-global.com.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerBitzer Compressor Spare-Part Typevalve Model Family2C, 2CC, 2CHC, 4CC, 4CHC
Contact us for a price
In stock
Valve Plate Assembly Bitzer for Models 4F,4G,4G.2,4H,4H.2,4J,4M.2,6F,6F.2,6G,6G.2,6H,6H.2,6J,6M.2,SG4 .CMP Part Number RTR-RTR-2203-50
0.0
Enhance the functionality of your Bitzer compressor with the RTR-2203-50 Discharge Valve Retainer. This pack of 50 retainers is precision-engineered for Bitzer models, ensuring optimal performance and longevity. Find it on mep-global.com.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerBitzer Compressor Spare-Part TypeValve Plate Model Family4F, 4G, 4G.2, 4H, 4H.2, 4J, 4M.2, 6H, 6H.2, 6F, 6F.2, 6G, 6G.2, 6J, 6M.2, SG4
Contact us for a price
In stock
Valve Plate Assembly Bitzer for Models 4P, CMP Part Number PLT-2336
0.0
PLT-2336
Enhance Bitzer compressors with the PLT-2336 Valve Plate Assembly, tailored for models 4P with a 65mm bore. This OEM assembly, identified by part number 304063-06, guarantees precision and efficiency, making it an ideal choice for compressor upgrades. Find it exclusively on mep-global.com.
Brand NameCMP Country of OriginUnited States of America Compressor ManufacturerBitzer Compressor Spare-Part TypeValve Plate Model Family4P, 4PC
Contact us for a price
In stock
Universal AC Outdoor Fan Motor Customized 40W 220V 0.4Amp Energy Saving
0.0
YDK95-40-6
Universal AC Outdoor Fan Motor Customized 40W 220V 0.4Amp Energy Saving
Voltage & Frequency220 Volt AC, 50-60 Hz Watt40W Ampere0.4A Brand NamePower Motors ColorGray
Contact us for a price
In stock
UAE Corporate Tax Registration Service
(Reviews: 1)
5
CORPTX
Streamline your UAE corporate tax registration with MEP-Global.com. Our hassle-free platform allows you to attach required documents and details, while our experts handle the rest. Save time and resources while ensuring compliance. Get started today!
AED 195.00 ($53.13)
(AED 204.75 ($55.79) inc tax)
U strap, Electrogalvanized
tembo
0.0
TGUS0000E0022
The U Strap, Electrogalvanized is designed to provide reliable support for piping systems vertically or horizontally to walls or ceilings. Made of mild steel, it offers durability and strength. Choose from various finishes.

Size Nominal (Inches):

1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" (More +8)
Brand NameTembo Country of OriginIndia MaterialMild Steel Size Nominal (Inches)1/2"
Contact us for a price
In stock
U strap, UL/FM, Electrogalvanized
tembo
0.0
TGUS00UFE0027
The U Strap, UL/FM, Electrogalvanized, is designed to provide vertical support to non-insulated piping systems. Available in various sizes and finishes.

Size Nominal (Inches):

3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6"
Brand NameTembo Country of OriginIndia MaterialMild Steel Size Nominal (Inches)3/4"
Contact us for a price
In stock
U strap with Lining, Electrogalvanized
tembo
0.0
TGUS0L00E0022
The U Strap with Lining, Electrogalvanized, is a standard pipe strap designed to support and restrain piping systems. Available in different sizes and finishes.

Size Nominal (Inches):

1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" (More +8)
Brand NameTembo Country of OriginIndia MaterialMild Steel Size Nominal (Inches)1/2"
Contact us for a price
In stock
U bolt with 2 Nut and 2 Washer, UL, Electrogalvanized
tembo
0.0
TGUB00ULE0027
The U Bolt with 2 Nut and 2 Washer is designed to provide vertical support and restrict lateral movement in piping systems. With its longer straight threaded length and two standard hex nuts, it offers secure connections. Made from mild steel and available in various finishes.

Size Nominal (Inches):

3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6" (More +3)
Brand NameTembo Country of OriginIndia MaterialMild Steel Size Nominal (Inches)3/4"
Contact us for a price
In stock
U bolt with 2 Nut and 2 Washer, Electrogalvanized
tembo
0.0
TGUB0000E0027
The U Bolt with 2 Nut and 2 Washer, Electrogalvanized is designed for securing piping to structural members while allowing axial movement. Made of mild steel, it provides strength and stability. Choose from various finishes.

Size Nominal (Inches):

3/4" 1/2" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" (More +9)
Brand NameTembo Country of OriginIndia MaterialMild Steel Rod Size10mm Size Nominal (Inches)3/4"
Contact us for a price
In stock
Threaded rod, Electrogalvanized, length 3 meter
tembo
0.0
TGTR00ME00600
Our threaded rods are designed for supporting ducting systems and piping racks. Available in various materials and finishes, they offer durability and strength. Choose from a wide range of sizes and threads to meet your specific requirements.

Size Nominal (Inches):

M6 M8 M10 M12 M16 M20
Brand NameTembo Country of OriginIndia MaterialMild Steel Size Nominal (Inches)M6
Contact us for a price
In stock
Thin Jaws Parallel Plier 160 mm
0.0
4880-160
THIS PARALLEL ACTION PLIER BOASTS THIN JAWS ALONG THEIR FULL LENGTH. MADE FOR DELICATE WORK IN TIGHT SPACES. Experience the exceptional control and precision of the Parallel Action Thin Jaws Plier 160 mm. Crafted with thin jaws along their full length, this plier is designed to excel in...
Brand NameMaun Country of OriginUnited Kingdom
AED 136.47 ($37.19)
(AED 143.29 ($39.04) inc tax)
In stock
+ −
Thermostat Guard Universal Compatibility - AC Thermostat Cover with Lock
0.0
BTG-EK
Our Thermostat Guard with Lock Box Cover is the perfect solution for protecting your thermostat settings and decreasing energy bills. Made from durable transparent plastic, it provides clear visibility while preventing tampering. Easy to install and compatible with most thermostats, this lockable cover ensures consistent temperature control.
Contact us for a price
In stock
Steel Straight Edge Metric
0.0
1700-001
Maun Steel Straight Edge Metric is an all-purpose carbon-steel tool for precise line marking on wallpaper, floor coverings, and leather. Crafted with utmost accuracy and designed for ease of use. Ideal for professionals and DIY enthusiasts.
Brand NameMaun ColorSilver Country of OriginUnited Kingdom MaterialCarbon Steel
AED 224.92 ($61.29)
(AED 236.17 ($64.35) inc tax)
In stock
+ −
Add to cart
Steel Straight Edge Imperial
0.0
1701-012
Maun Steel Straight Edge is a versatile carbon-steel tool designed for precise line marking on wallpaper, floor coverings, and leather. Crafted with utmost accuracy, it stays firmly in place for improved precision. Ideal for professionals and serious DIY enthusiasts.
Brand NameMaun ColorSilver Country of OriginUnited Kingdom MaterialCarbon Steel
AED 69.50 ($18.94)
(AED 72.98 ($19.89) inc tax)
In stock
+ −
Add to cart
Sprinkler Hanger, UL/FM, Electrogalvanized
tembo
0.0
TGSHN0UFE0027
The Sprinkler Hanger, UL/FM, Electrogalvanized is designed to provide vertical support for non-insulated piping systems. It offers adjustable pipe elevation and is suitable for fire extinguishing pipe installation. Available in different finishes.

Size Nominal (Inches):

3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6" (More +3)
Brand NameTembo Country of OriginIndia MaterialMild Steel CertificationsFederal Specification WW-H-171E & A-A-1192A(Type 1), ANSI/MSS SP-58 & SP-69(Type 1), FM Approved, UL Listed Size Nominal (Inches)3/4"
Contact us for a price
In stock
Sprinkler Hanger, Electrogalvanized
tembo
0.0
TGSHN000E0027
The Sprinkler Hanger is designed to provide vertical support to non-insulated piping systems, particularly for fire extinguishing pipe installations. It features a piece of mild steel shaped to support the pipe, offering double thickness at the support point. The hanger allows for pipe elevation adjustment by manipulating the position of the sprinkler nut on the hanger rod. Available in various sizes and finishes, including Plain, Electro-Galvanized, Hot Dip Galvanized, Zinc Flake, and Epoxy Coated, the Sprinkler Hanger is a reliable and durable solution for your piping support needs.

Size Nominal (Inches):

3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6" (More +3)
Brand NameTembo Country of OriginIndia MaterialMild Steel Size Nominal (Inches)3/4"
Contact us for a price
In stock
Spring hanger
tembo
0.0
TGSPH02500010
Spring Hangers are specifically designed to isolate noise and vibration from suspended mechanical equipment. They are commonly used in applications such as air handling units, FCUs, cabinet fans, and proximity to rotating mechanical equipment. Constructed from mild steel with a variable spring, these hangers provide efficient vibration isolation.

Rated Load (KG):

10 15 20 40 60 100 160 200 300 400 (More +5)
Brand NameTembo Country of OriginIndia MaterialMild Steel Rated Load (KG)10
Contact us for a price
In stock
Split air Conditioner Outdoor Fan Motor Unit 0.6A 60W / Hvac Fan Types
0.0
YDK120-60-6
Find high-quality split air conditioner outdoor fan motor units at MEP Global. Our motors are customizable to fit your specific needs.
Brand NamePower Motors ColorBlack Country of OriginChina FeaturesOutdoor Unit, 6 Pole, Single Shaft RPM850
Contact us for a price
In stock
Socket and Tool Set, 129-Pieces, Yato, YT-38881
0.0
YT-38881
Yato YT-38881 Socket and Tool Set is a 129-piece professional toolkit made of durable chrome-vanadium steel, developed to meet the needs of specialized car and mechanical services.
Brand NameYato ColorBlack Country of OriginChina
AED 840.00 ($228.88)
(AED 882.00 ($240.33) inc tax)
In stock
+ −
Snipe Nose Smooth Jaws Parallel Plier 125 mm
0.0
4340-125
The Snipe Nose Smooth Jaws Parallel Plier 125 mm is the ultimate tool for delicate work and restricted spaces. Its smooth parallel jaws provide secure gripping without damaging the workpiece. Perfect for jewellery making, soft wire manipulation, and handling small items with precision and control.
Brand NameMaun Country of OriginUnited Kingdom CertificationsISO 5747:1995, BS 3087-7:1996
AED 128.89 ($35.12)
(AED 135.33 ($36.87) inc tax)
In stock
+ −
Snipe Nose Serrated Jaws Parallel Plier 125mm
0.0
4330-125
Precision Snipe Nose Pliers are the perfect parallel pliers for working with small items or in confined spaces. With their tapered serrated jaws, they offer easier access and a secure grip on small components. These pliers are ideal for manufacturers, jewellery makers, and hobbyists seeking precise control in their projects.
Brand NameMaun Country of OriginUnited Kingdom CertificationsBS 3087-7:1996, ISO 5747:1995
AED 123.83 ($33.74)
(AED 130.02 ($35.43) inc tax)
In stock
+ −
Small Vibration 850RPM 50Hz / 60Hz Outdoor Fan Motor For Air Conditioning
0.0
YDK120-50-4A
YSK120-40-4A3 is a small vibration 850RPM fan motor suitable for window type air conditioner and fresh air ventilation system.
Brand NamePower Motors ColorGray Country of OriginChina FeaturesOutdoor Unit, Single Shaft RPM850
Contact us for a price
In stock
Single Phase Outdoor Fan Motor Air Conditioner Single Shaft 20W – 70W
0.0
YDK95-YDK120
This Single Phase Outdoor Fan Motor is designed for split air conditioner outdoor units, fresh air ventilation systems, and air filtration and purification.
Brand NamePower Motors ColorGray Country of OriginChina FeaturesClockwise Rotation, Outdoor Unit, Copper Winding, Single Shaft RPM865
Contact us for a price
In stock
Side Cutter Parallel Plier For Hard Wire Return Spring
0.0
4951-140
The Side Cutter Parallel Plier For Hard Wire with Return Spring combines the versatility of a side cutter parallel plier with the convenience of a return spring. It features serrated parallel jaws for a secure grip on square and hexagonal fastenings, a v-slotted jaw for wire feeding and holding, and an integrated cutter for precise cutting. With its robust construction, rust-proof finish, and the ability to multiply hand force by 25, this plier is built to last and deliver exceptional performance.
Brand NameMaun Country of OriginUnited Kingdom CertificationsBS 3087-7:1996, ISO 5747:1995
AED 128.89 ($35.12)
(AED 135.33 ($36.87) inc tax)
In stock
+ −
Add to cart
Side Cutter Parallel Plier For Hard Wire Comfort Grips
0.0
4960-140
The Versatile Wire Manipulation Pliers with Added Cutter are the ultimate problem-solving tool for your toolbox. Designed by Maun, these pliers excel at gripping, manipulating, and cutting wire. With a v-slotted jaw, serrated parallel jaws, and an integrated cutter, they offer unmatched versatility. Multiply your hand force by 25, making cutting effortless. The robust construction and rust-proof finish ensure durability, while the soft plastic grips provide comfort during extended use. Ideal for electricians, technicians, and DIY enthusiasts.
Brand NameMaun Country of OriginUnited Kingdom CertificationsBS 3087-7:1996, ISO 5747:1995
AED 132.68 ($36.15)
(AED 139.31 ($37.96) inc tax)
In stock
+ −
Add to cart
Side Cutter Parallel Plier For Hard Wire
0.0
4950-125
The Side Cutter Parallel Plier For Hard Wire combines the functionality of a flat nose parallel plier with serrated jaws and an added side cutter. Designed for cutting hard wire up to 3.0 mm Ø and ISO standard piano wire, this plier multiplies hand force by 23, reducing cutting effort. The v-slotted jaw allows for easy wire feeding and holding, while the serrated jaws provide a secure grip on square and hexagonal fastenings. With precision-machined and hardened blades, this plier is built to last.
Brand NameMaun Country of OriginUnited Kingdom CertificationsISO 5747:1995, BS 3087-7:1996
AED 120.04 ($32.71)
(AED 126.04 ($34.34) inc tax)
In stock
+ −
Add to cart
Secured Business Email for your Business/organization, Zoho Mail
(Reviews: 1)
5
EMAIL_0080
Ready to upgrade your business email? Purchase the Zoho Mail professional email hosting service and take the first step towards a more efficient and professional online presence. Our team of experts will guide you through the process of setting up your new custom email addresses under your domain name, ensuring a seamless transition with our email migration, security, and support services. Don't wait any longer to improve your email management system - get it now.
AED 300.00 ($81.74)
(AED 315.00 ($85.83) inc tax)
In stock
+ −
Scotchlok 8A 8B Crimping Plier 150 mm
0.0
5620-140
Designed for easy closure of ScotchlokTM 8A and 8B connectors, our high-quality crimping plier ensures reliable connections with every use. Crafted from forged steel, it features an integral wire cutter, comfortable grips, and a durable construction.
Brand NameMaun Country of OriginUnited Kingdom
AED 142.79 ($38.91)
(AED 149.93 ($40.85) inc tax)
In stock
+ −
Rubber Support Insert - 32MM
tembo
0.0
TGRSI00223225
MEP-Global offers a reliable and durable 32mm rubber support insert designed to prevent the crushing of insulation in supporting points of insulated pipes. These inserts are dimensionally accurate and molded to provide excellent resistance to deterioration and distortion. Crafted from high-quality neoprene or compounded rubber, they offer effective insulation and vibration dampening. With a density of 1400kg/m3 and a low thermal conductivity of 0.16W/m°C, these support inserts provide optimal thermal insulation for enhanced energy efficiency. They can withstand temperatures ranging from -20°C to 110°C, making them suitable for a wide range of applications. Choose MEP-Global for high-quality rubber support inserts that ensure the long-term performance of your insulated pipes.

Size Nominal (Inches):

1/2" X 32MM X 25MM 3/4" X 32MM X 25MM 1" X 32MM X 25MM 1-1/4" X 32MM X 25MM 1-1/2" X 32MM X 25MM 2" X 32MM X 25MM 2-1/2" X 32MM X 38MM 3" X 32MM X 38MM 4" X 32MM X 38MM 5" X 32MM X 38MM (More +4)
Brand NameTembo Country of OriginIndia Size Nominal (Inches)1/2" X 32MM X 25MM
Contact us for a price
In stock
Rubber Support Insert - 25MM
tembo
0.0
TGRSI00222525
Our 25mm rubber support inserts are designed to prevent the crushing of insulation in supporting points of insulated pipes. With excellent resistance to deterioration and distortion, they provide reliable protection. Available in various sizes to suit your needs.

Size Nominal (Inches):

1/2" X 25MM X 25MM 3/4" X 25MM X 25MM 1" X 25MM X 25MM 1-1/4" X 25MM X 25MM 1-1/2" X 25MM X 25MM 2" X 25MM X 25MM 2-1/2" X 25MM X 38MM 3" X 25MM X 38MM 4" X 25MM X 38MM 5" X 25MM X 38MM (More +4)
Brand NameTembo Country of OriginIndia Size Nominal (Inches)1/2" X 25MM X 25MM
Contact us for a price
In stock
Rubber Support Insert - 19MM
tembo
0.0
TGRSI00221925
The Rubber Support Insert - 19mm is designed to be placed at supporting points of insulated pipes, preventing insulation crushing. Available in various sizes and made from high-quality neoprene or compounded rubber.

Size Nominal (Inches):

1/2" X 19MM X 25MM 3/4" X 19MM X 25MM 1" X 19MM X 25MM 1-1/4" X 19MM X 25MM 1-1/2" X 19MM X 25MM 2" X 19MM X 25MM 2-1/2" X 19MM X 25MM 3" X 19MM X 38MM 4" X 19MM X 38MM 5" X 19MM X 38MM (More +4)
Brand NameTembo Country of OriginIndia Size Nominal (Inches)1/2" X 19MM X 25MM
Contact us for a price
In stock
Rubber hanger
tembo
0.0
TGRH000000010
Achieve optimal suspension and vibration isolation with our durable Rubber Hanger. Perfect for fan coil units, pipes, ducts, brackets, and light-weight equipment. Customizable sizes available.

Rated Load (KG):

10 20 30 50 70 120
Brand NameTembo Country of OriginIndia MaterialMild Steel Rated Load (KG)10
Contact us for a price
In stock
Ratchet Cable Cutter 250 mm
0.0
3080-250
Maun's Ratchet Cable Cutter combines high-performance cutting with a compact design. With its ratchet mechanism, it provides precise control and easily cuts through copper, aluminum, and steel wire armoured cables. The hinged blade allows cutting in tight spaces, making it ideal for electricians, machine service engineers, and serious DIYers.
Brand NameMaun Country of OriginUnited Kingdom
AED 1,149.88 ($313.32)
(AED 1,207.37 ($328.98) inc tax)
In stock
+ −
Professional Website Design and Hosting for your Business/organization
0.0
WEB_0001
With 20+ years of experience, we offer Professional Website Design and Hosting services that are second to none. Our seasoned team of experts creates custom solutions tailored to your unique needs. We excel in crafting visually stunning websites that captivate your audience and drive results. Trust us to provide reliable hosting, ensuring your website is secure and accessible at all times. Experience the difference of our expertise and professionalism. Contact us today for a remarkable online presence that sets you apart from the competition.
AED 700.00 ($190.74) AED 500.00 ($136.24)
You save: AED 200.00 ($54.50) (AED 525.00 ($143.05) inc tax)
In stock
+ −
Probst Solo Attachment For GRABO, FXAH-120 SOLO
0.0
48500055
Maximize your output with the Probst Solo Attachment for GRABO FXAH-120 SOLO. This all stainless-steel attachment is perfect for laying tiles and pavers with ease.
AED 888.00 ($241.96)
(AED 932.40 ($254.06) inc tax)
In stock
+ −
Probst Duo Attachment For GRABO, FXAH-120 DUO
0.0
48500054
The Probst Duo Attachment for GRABO allows for precise laying of tiles and flooring panels. The metal attachment connects to GRABO's anchoring points and is ideal for two workers to work together.
AED 1,020.00 ($277.93)
(AED 1,071.00 ($291.83) inc tax)
In stock
+ −
Pipe Hanger without Lining, UL/FM, Electrogalvanized
tembo
0.0
TGNC00ULE0027
The Pipe Hanger without Lining, UL/FM, Electrogalvanized is designed for supporting non-insulated stationary pipelines in a horizontal position. Available in various finishes.

Size Nominal (Inches):

3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6" (More +3)
Brand NameTembo Country of OriginIndia MaterialMild Steel CertificationsUL Listed, FM Approved Size Nominal (Inches)3/4"
Contact us for a price
In stock
Pipe Hanger without Lining , Electrogalvanized
tembo
0.0
TGNC0000E0027
The Pipe Hanger without Lining, Electrogalvanized is designed to provide sturdy support for non-insulated stationary pipelines in a horizontal position. Made of mild steel, it offers durability and strength. Choose from various finishes.

Size Nominal (Inches):

3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6" (More +3)
Brand NameTembo Country of OriginIndia MaterialMild Steel Size Nominal (Inches)3/4"
Contact us for a price
In stock
Pipe Hanger with EPDM Lining, UL/FM, Electrogalvanized
tembo
0.0
TGNC0LUFE0027
The Pipe Hanger with EPDM Lining, UL/FM, Electrogalvanized is designed to support non-insulated stationary pipelines in a horizontal position. It features an EPDM lining for noise reduction. Available in various sizes and finishes.

Size Nominal (Inches):

3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6" (More +3)
Brand NameTembo Country of OriginIndia MaterialMild Steel Size Nominal (Inches)3/4"
Contact us for a price
In stock
Pipe Hanger with EPDM Lining, Electrogalvanized
tembo
0.0
TGNC0L00E0027
The Pipe Hanger with EPDM Lining is recommended for supporting non-insulated stationary pipelines in a horizontal position. Constructed with mild steel and EPDM lining, it provides durability, noise reduction, and easy installation. Available in various sizes and finishes.

Size Nominal (Inches):

3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6" (More +3)
Brand NameTembo Country of OriginIndia MaterialMild Steel Size Nominal (Inches)3/4"
Contact us for a price
In stock
Outdoor Unit Fan Motor , Air Conditioning Fan Motor Low Noise
0.0
YDK120-70-6-1
MEP Global's Outdoor Unit Fan Motor is a reliable and low-noise option for split air conditioner units and ventilation systems.
Brand NamePower Motors ColorBlack Country of OriginChina FeaturesOutdoor Unit, 1 Pole, 6 Pole, Single Shaft Watt70W
Contact us for a price
In stock
Outdoor Ceiling Fan Motor Replacement , Ceiling Fan DC Motor 850RPM
0.0
YDK120-50-6-1
The YDK120 series outdoor fan motor is a versatile motor designed for split air conditioner outdoor units, fresh air ventilation systems, and ceiling type air conditioners. It features a nickel-plated shaft, electrophoretic coated enclosure, low noise NSK rolling bearing, and a reasonable structure with high efficiency and low temperature rise.
Brand NamePower Motors ColorGray Country of OriginChina FeaturesClockwise Rotation, Outdoor Unit, 6 Pole, 1 Pole, Single Shaft RPM850
Contact us for a price
In stock
OTTOVAC, OV-V1
0.0
OV-V1
The OTTOVAC is a portable electric vacuum lifting device for glass and smooth, non-porous surfaces, with a maximum lifting capacity of 200kg.
Brand NameGrabo Country of OriginUnited States of America
AED 560.00 ($152.59)
(AED 588.00 ($160.22) inc tax)
In stock
+ −
Olive Cutter Screw Type Tool
0.0
5649-100
Our Compact Olive Cutter Screw Type Tool is the go-to solution for plumbers seeking fast and damage-free olive cutting in confined spaces. With its precise screw-turn action and high-quality steel cutting edges, it provides reliable and accurate cuts every time.
Brand NameMaun Country of OriginUnited Kingdom
AED 147.84 ($40.28)
(AED 155.23 ($42.30) inc tax)
In stock
+ −
Add to cart
Olive Cutter Plier Type Tool
0.0
5649-200
Our High-Leverage Olive Cutter Plier Type Tool is the ultimate solution for reliable and damage-free olive cutting. With its high-leverage design and high-quality steel cutting blades, it provides a clean cut every time with minimal effort.
Brand NameMaun Country of OriginUnited Kingdom
AED 155.42 ($42.35)
(AED 163.19 ($44.47) inc tax)
In stock
+ −
Add to cart
Nemo GRABO 2 Batteries & 2 Seals , NG-2B-FB-2S
0.0
NG-2B-FB-2S
The Nemo GRABO is a powerful electric vacuum lifter that comes with 2 batteries and 2 foam seals, making it the perfect tool for lifting heavy objects with ease.
AED 996.00 ($271.39)
(AED 1,045.80 ($284.96) inc tax)
In stock
+ −
NEMO GRABO 1 Battery & 1 Seal, NG-1B-FB-1S
0.0
NG-1B-FB-1S
The Nemo GRABO Classic is a portable electric vacuum lifter with a rugged design and high pumping capacity of 20 liters per minute. It's capable of lifting almost any surface weighing up to 375 lbs and comes with a foam rubber seal, replacement filters, and a carrying bag.
AED 796.00 ($216.89)
(AED 835.80 ($227.74) inc tax)
In stock
+ −
Nemo GRABO , GRABO H / NGH-V2
0.0
GRABO-H/NGH-V2
The Nemo GRABO H/NGH-V2 is a powerful battery-powered suction cup that allows for easy lifting and moving of heavy objects.
AED 220.00 ($59.95)
(AED 231.00 ($62.94) inc tax)
In stock
+ −
Multipole Crimping Tool For QM Connectors 220 mm
0.0
5611-200
The QM Multipole Connector Crimping Tool is the perfect solution for achieving a perfect, gas-tight crimp every time. Designed for crimping QM multipole connectors onto various wire sizes, this tool features precision-machined jaw profiles, a compound-lever action that multiplies hand force by 24, and soft plastic grips for operator comfort. Its robust construction and rust-proof finish ensure durability and longevity. Ideal for mains control lead connections, small transmission systems, and more.
Brand NameMaun Country of OriginUnited Kingdom CertificationsBS 3087-7:1996, ISO 5747:1995
AED 147.84 ($40.28)
(AED 155.23 ($42.30) inc tax)
In stock
+ −
Metal Sandwich Pad
tembo
0.0
TGMSP78003003
Effectively suppress noise, vibration, and impact with our Metal Sandwich Pad. Ideal for machinery applications, preventing vibrations from reaching the floor or ground. Various sizes available.

Size Nominal (Inches):

7/8’’ X 3’’ X 3’’ 7/8’’ X 4’’ X 4’’ 7/8’’ X 6’’ X 6’’ 7/8’’ X 8’’ X 8’’ 7/8’’ X 12’’ X 12’’ 7/8’’ X 18’’ X 18’’
Brand NameTembo Country of OriginIndia Size Nominal (Inches)7/8’’ X 3’’ X 3’’
Contact us for a price
In stock
Metal Safety Ruler, Metric or Imperial measurements
0.0
1773-012
Maun's Stainless Steel Safety Rule offers a lasting, safe, and practical solution for measuring, scoring, and cutting. Its unique M-shaped profile keeps fingers away from the cutting edge, providing a feeling of safety and security.
Brand NameMaun Country of OriginUnited Kingdom MaterialStainless Steel
AED 10.11 ($2.75)
(AED 10.62 ($2.89) inc tax)
In stock
+ −
Add to cart
Maun Wad Punch Set With Centre Punch Metric or Imperial
0.0
1000-05
Discover the precision and versatility of our complete kit - One Handle, Nine Punches. Crafted to exacting standards, this versatile tool is perfect for creating precisely shaped gaskets and washers in various sizes. Cut with confidence and accuracy, as each punch is designed to deliver clean,...
Brand NameMaun Country of OriginUnited Kingdom
AED 202.18 ($55.09)
(AED 212.29 ($57.84) inc tax)
In stock
+ −
Add to cart
Maun Toolmakers Clamps
0.0
1011-075
The Maun Precision Machining Clamp is a clever little clamp designed to keep a tight grip on your work. Engineered by Maun for precision working, this small and strong clamp is perfect for machining operations and fine detail work. With its screw clip mechanism and parallel jaws, it easily and securely holds objects together. Choose Maun for durable tools that deliver exceptional performance.
Brand NameMaun ColorBlack Country of OriginUnited Kingdom
AED 97.30 ($26.51)
(AED 102.17 ($27.84) inc tax)
In stock
+ −
Add to cart
Maun Lightweight Punch Plier Set, Revolving Leather Hole Punch Plier 2 mm To 4.8 mm
0.0
2230-200
Lightweight and easy-to-use punch plier set designed by Maun for hole punching in soft materials. Features six punch sizes and a revolving drum for quick selection.
Brand NameMaun ColorSilver Country of OriginUnited Kingdom MaterialCarbon Steel
AED 50.54 ($13.77)
(AED 53.07 ($14.46) inc tax)
In stock
+ −
Maun Heavy Duty Revolving Leather Hole Punch Plier
0.0
2233-200
Experience the masterpiece of leather punching with Maun's Heavy Duty Revolving Leather Hole Punch Plier. Lever-assisted, accurate punch indexing, and built to last.
Brand NameMaun Country of OriginUnited Kingdom
AED 151.63 ($41.32)
(AED 159.21 ($43.38) inc tax)
In stock
+ −
Long Nose Plier 150 mm
0.0
2910-150
Work efficiently in tight spaces with the Long Nose Plier 150 mm. Lightweight, durable, and designed for precise gripping and bending. A toolbox essential.
Brand NameMaun Country of OriginUnited Kingdom MaterialSteel CertificationsBS 3087-7:1996, ISO 5747:1995
AED 42.96 ($11.71)
(AED 45.11 ($12.29) inc tax)
In stock
+ −
Light saddle, Electrogalvanized
tembo
0.0
TGLS0000E0022
APPLICATION: LIGHT SADDLE is recommended for supporting a piping system with vertically or horizontally to walls or ceilings. CONSTRUCTION: LIGHT SADDLE consists of single piece of mild steel shaped to the proper configuration as shown in the diagram. MATERIALS: Mild Steel. Also...

Size Nominal (Inches):

1/2" 3/4" 1" 1-1/4" 1-1/2" 2"
Brand NameTembo Country of OriginIndia MaterialMild Steel Size Nominal (Inches)1/2"
Contact us for a price
In stock
Johnson Controls Network Sensor, NSB8BTN240-0
0.0
NSB8BTN240-0
Johnson Controls NSB8BTN240-0 Network Sensor is a versatile tool that monitors temperature, humidity, CO2 levels, and motion in your building's environment. Substitute for model for NS-ATA7002-0 (Discontinued)
AED 720.00 ($196.19)
(AED 756.00 ($205.99) inc tax)
In stock
+ −
Honeywell Air Touch V2 Air Purifier With H13 Hepa Filter, Activated Carbon Filter And Pre-Filter
0.0
HC000018/AP/V2/UK
Pre Filter & High grade H13 HEPA filter Activated Carbon filter Filter life of 3000 hours or 1 Year CADR of up to 250 m3/h and coverage area of up to 300 square feet Advanced filtration system with 5 air changes per hour Product Dimensions ‏ : ‎  31 x 15.3 x 47 cm; 3.8...
Brand NameHoneywell ColorWhite Country of OriginChina
AED 579.00 ($157.77)
(AED 607.95 ($165.65) inc tax)
In stock
+ −
Hex Nuts, Electrogalvanized
tembo
0.0
TGHN000000000
MEP-Global offers a wide range of electrogalvanized hex nuts to meet your fastening requirements. Our selection includes standard hex nuts, heavy hex nuts, hex coupling nuts, nylon lock nuts, spring nuts, dome nuts, and wing nuts. These nuts are available in various materials, such as mild steel, carbon steel, alloy steel, and stainless steel. With different finishes, including plain, electro-galvanized, hot dip galvanized, zinc flake, yellow, cadmium, and nickel, you can choose the right nut for your specific application. We provide hex nuts in sizes ranging from M6 to M64 in metric series and 1/4" to 2-1/2" in imperial measurements. Custom sizes can be manufactured upon request. Our hex nuts conform to international standards, such as ASTM/ASME, BS, DIN, BS EN ISO, and JIS, and come in various grades to meet your specific needs.

Size Nominal (Inches):

M6 M8 M10 M12 M16 M20
Brand NameTembo Country of OriginIndia Size Nominal (Inches)M6
Contact us for a price
In stock
Hex Bolts, Electrogalvanized
tembo
0.0
TGSS000000000
Hex Bolts are threaded fasteners with a hexagonal head designed to hold and tighten materials or join two objects together. These bolts have external male standard threads that require a matching pre-formed female thread, such as a nut. With options for various thread types and a wide range of sizes, including metric and imperial measurements, our hex bolts are available in different materials and finishes for diverse applications.

Size Nominal (Inches):

M6 X 25MM M8 X 30MM M10 X 40MM M12 X 50MM M16 X 75MM M20 X 100MM
Brand NameTembo Country of OriginIndia Size Nominal (Inches)M6 X 25MM
Contact us for a price
In stock
Heavy saddle, Electrogalvanized
tembo
0.0
TGHS0000E0022
The Heavy Saddle, Electrogalvanized is designed for supporting heavy-weight piping systems vertically or horizontally. Suitable for electrical and insulated pipes, it provides secure mounting and better gripping. Available in various sizes and finishes.

Size Nominal (Inches):

1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"
Brand NameTembo Country of OriginIndia MaterialMild Steel Size Nominal (Inches)1/2"
Contact us for a price
In stock
Heavy duty anti vibration Rubber pad 18'' x 18'' x 3/4" Waffle Type
tembo
0.0
TGWP034018018
Experience optimal vibration isolation with our Heavy Duty Anti-Vibration Rubber Pad in a waffle type design. Designed for heavy-duty machinery, it provides superior stability and noise reduction.
Brand NameTembo Size Nominal (Inches)3/4’’ x 18’’ x 18’’
Contact us for a price
In stock
Heavy duty anti vibration Ribbed Mounting Pad
tembo
0.0
TGRMP38003003
Suppress noise, vibration, and impact with our Heavy Duty Anti-Vibration Ribbed Mounting Pad. Designed for machinery applications, it offers excellent vibration absorption and impact resistance. Various sizes available.

Size Nominal (Inches):

3/8’’ X 3’’ X 3’’ 3/8’’ X 4’’ X 4’’ 3/8’’ X 6’’ X 6’’ 3/8’’ X 8’’ X 8’’ 3/8’’ X 12’’ X 12’’ 3/8’’ X 18’’ X 18’’
Brand NameTembo Country of OriginIndia Size Nominal (Inches)3/8’’ X 3’’ X 3’’
Contact us for a price
In stock
Harris Safety-Silv 45% Flux Coated Silver Solder 1/16", 9 Sticks, 45F3184
0.0
45F3184
Experience reliable and efficient soldering with the Harris Safety-Silv 45% Flux Coated Silver Solder. This general-purpose silver brazing alloy is cadmium-free and offers good ductility and capillary flow.
Brand NameHarris ColorBlue Country of OriginUnited States of America MaterialSilver, Copper, Zink
AED 295.24 ($80.45)
(AED 310.00 ($84.47) inc tax)
In stock
+ −
Hardshell Case for GRABO PRO
0.0
HC-V1
Protect your valuable GRABO tools with the ultimate solution - the Hardshell Case!
AED 128.00 ($34.88)
(AED 134.40 ($36.62) inc tax)
In stock
+ −
Hand Carry Vacuum Lifter, GRABO, Large Panel Rail, SST-1
0.0
SST-1
Lift large, heavy and fragile materials with ease using the Hand Carry Vacuum Lifter GRABO Large Panel Rail SST-1, available on mep-global.com.
AED 3,360.00 ($915.53)
(AED 3,528.00 ($961.31) inc tax)
In stock
+ −
GRABO USA Charger, RK13023
0.0
RK13023
The GRABO USA Charger is a compact and durable device charger that features fast and efficient charging capability and a built-in safety system to protect your devices.
Brand NameGrabo Country of OriginUnited States of America
AED 76.00 ($20.71)
(AED 79.80 ($21.74) inc tax)
In stock
+ −
GRABO Standard Foam Seal, RK13001
0.0
RK13001
Upgrade your GRABO tool with the Foam-Rubber Seal Type A1 for a more efficient and reliable performance. This patented closed cell, high friction rubber seal is specifically designed to fit all GRABO models and keep dust and debris out of your tool.
Brand NameGrabo Country of OriginUnited States of America
AED 84.00 ($22.89)
(AED 88.20 ($24.03) inc tax)
In stock
+ −
GRABO Slender Seal, RK23002
0.0
RK23002
GRABO Slender Seal is a versatile lifting tool designed for long, narrow surfaces like tiles, pavers, and pipes, with a maximum capacity of 132 lbs.
Brand NameGrabo Country of OriginUnited States of America
AED 180.00 ($49.05)
(AED 189.00 ($51.50) inc tax)
In stock
+ −
GRABO Seam Setter, SST
0.0
SST
GRABO Stone Seam Setters are professional seam setters that allow for precise leveling and joining of seams on porous and non-porous surfaces. Made with durable stainless steel components, these seam setters are perfect for heavy-duty stone tops.
Brand NameGrabo Country of OriginUnited States of America
AED 1,000.00 ($272.48)
(AED 1,050.00 ($286.10) inc tax)
In stock
+ −
GRABO RockSeal™ , RK23001
0.0
RK23001
The GRABO RockSeal™ is a patented unit designed to hold tight to extremely rough and hard surfaces with up to 10 mm surface profile. Compatible with all GRABO models, it's the ultimate solution for construction sites and DIY projects.
AED 100.00 ($27.25)
(AED 105.00 ($28.61) inc tax)
In stock
+ −
GRABO PRO In Hardshell Case, GP-1Li-FB-1S-HC
0.0
GP-1Li-FB-1S-HC
The GRABO PRO In Hardshell Case is a durable and protective storage solution for GRABO tools. This kit includes a powerful vacuum lifter with a digital pressure gauge, a battery charger, and a foam rubber seal preinstalled on the tool. It can lift up to 375 lbs or 170 kgs and pump 20 liters of air per minute.
AED 1,324.00 ($360.76)
(AED 1,390.20 ($378.80) inc tax)
In stock
+ −
GRABO PRO - GP-1Li-FB-1S (Pro-lifter-20)
0.0
GP-1Li-FB-1S
The GRABO Pro is a portable electric vacuum lifter that can lift up to 375 lbs with automatic pressure sensors and a digital pressure gauge.
AED 1,196.00 ($325.89)
(AED 1,255.80 ($342.18) inc tax)
In stock
+ −
GRABO Multi Socket Charger / International GRABO Charger, RK13017
0.0
RK13017
The International GRABO Charger is a high-quality multi socket charger designed for the GRABO 14.8 Volt Battery. It features interchangeable adapters that make it ideal for international travel and use, ensuring that your GRABO battery is always ready to go.
AED 68.00 ($18.53)
(AED 71.40 ($19.46) inc tax)
In stock
+ −
GRABO Erguo, ERG-S1
0.0
ERG-S1
The Erguo S1 is a long reach arm extension designed to reduce strain on the back and shoulders while lifting heavy items. It's easy to install and compatible with any GRABO model (except GRABO H).
Brand NameGrabo Country of OriginUnited States of America
AED 396.00 ($107.90)
(AED 415.80 ($113.30) inc tax)
In stock
+ −
GRABO Canvas Bag, SN23017
0.0
SN23017
Introducing the GRABO Canvas Bag, a durable and versatile storage solution for your GRABO tools. Made from heavy-duty canvas fabric, this bag is built to withstand heavy use and keep your tools secure and organized.
Brand NameGrabo ColorBlack Country of OriginUnited States of America
AED 56.00 ($15.26)
(AED 58.80 ($16.02) inc tax)
In stock
+ −
GRABO Cabinet Install Plates By Izzy Swan (Set of 2), 480
0.0
480
GRABO Cabinet Installation Plates by Izzy Swan is an easy solution for hanging and installing cabinets. These plates are screwed in with two bolts and provide a flat and level surface for holding heavy objects.
AED 596.00 ($162.40)
(AED 625.80 ($170.52) inc tax)
In stock
+ −
GRABO Brace Seal, BS-21951
0.0
BS-21951
The GRABO Brace Seal is a replacement seal for all GRABO power tools, specifically designed for thin and fragile surfaces.
AED 100.00 ($27.25)
(AED 105.00 ($28.61) inc tax)
In stock
+ −
GRABO Battery, GB2500
0.0
GB2500
The GRABO Battery is a high-capacity lithium-ion battery that fits all GRABO models and provides optimal performance.
Brand NameGrabo Country of OriginUnited States of America
AED 116.00 ($31.61)
(AED 121.80 ($33.19) inc tax)
In stock
+ −
GRABO 90 Degree Stone Seam Setter, SST-1-1
0.0
SST-1-1
The GRABO 90 Degree Stone Seam Setter is a professional tool for joining seams on various stone materials, ensuring straight and precise alignment.
AED 1,320.00 ($359.67)
(AED 1,386.00 ($377.66) inc tax)
In stock
+ −
Flexible Duct,Insulated, 7.5Meter length
0.0
MEP-FDI-04
A flexible Duct is a very strong, fully flexible, compressible lightweight duct that is widely used in air-conditioning and ventilation systems, for commercial, industrial, and residential applications. Flexible Duct is extremely durable and will maintain dimensional stability when fully...

Color:

 

Diameter:

4" 6" 8" 10" 12" 14" 16" 18"
ColorSilver Country of OriginUnited Arab Emirates Diameter4"
AED 35.00 ($9.54)
(AED 36.75 ($10.01) inc tax)
In stock
+ −
Add to cart
Flat Nose Parallel Plier Return Spring
0.0
4861-140
Maun's Parallel Jaw Pliers are the original problem solver. With their v-slotted jaws, serrated grip, and spring return handles, these multi-purpose pliers excel at holding, gripping, and manipulating wire. The parallel jaws ensure a secure hold on square and hexagonal fastenings, making them a must-have tool for professionals and DIYers.
Brand NameMaun Country of OriginUnited Kingdom CertificationsBS 3087-7:1996, ISO 5747:1995
AED 93.51 ($25.48)
(AED 98.19 ($26.75) inc tax)
In stock
+ −
Add to cart
Flat Nose Parallel Plier Comfort Grips
0.0
4866-140
Maun's Comfort Grip Parallel Jaw Pliers are the original problem solver for wire manipulation tasks. With their v-slotted jaws, serrated grip, and soft plastic grips, these multi-purpose pliers excel at holding, gripping, and manipulating wire. The parallel jaws ensure a secure hold on square and hexagonal fastenings, making them indispensable for professionals and DIYers.
Brand NameMaun Country of OriginUnited Kingdom CertificationsISO 5747:1995, BS 3087-7:1996
AED 93.51 ($25.48)
(AED 98.19 ($26.75) inc tax)
In stock
+ −
Add to cart
Flat Nose Parallel Plier
0.0
4860-200
Maun's Parallel Jaw Pliers are the original problem solver. With their v-slotted jaws and serrated grip, these multi-purpose pliers excel at holding, gripping, and manipulating. The parallel jaws ensure a secure hold on square and hexagonal fastenings, making them a must-have tool for professionals and DIYers.
Brand NameMaun Country of OriginUnited Kingdom CertificationsBS 3087-7:1996, ISO 5747:1995
AED 127.62 ($34.77)
(AED 134.00 ($36.51) inc tax)
In stock
+ −
Add to cart
Fencing Plier Comfort Grips 200 mm
0.0
4969-200
Engineered for Southern Hemisphere livestock farmers, our 200mm Comfort Grip Fencing Pliers are perfect for fitting and repairing high tensile electric wire. The v-slotted jaw, integrated cutter, and parallel serrated jaws ensure secure and precise operation.
Brand NameMaun Country of OriginUnited Kingdom CertificationsISO 5747:1995, BS 3087-7:1996
AED 183.22 ($49.92)
(AED 192.38 ($52.42) inc tax)
In stock
+ −
Fencing Plier 200 mm
0.0
4959-200
The Heavy-Duty Fencing Pliers, also known as the Livestock Farmer's Workhouse, are engineered to handle the toughest jobs. With their rugged construction, v-slotted jaw, and integrated heavy-duty cutter, these pliers are perfect for fitting and repairing high tensile electric fencing wire. They provide a secure grip on square and hexagonal fastenings and multiply hand force by 25, making cutting effortless. Built to last, these pliers are the go-to tool for farmers, utility workers, and serious DIY enthusiasts.
Brand NameMaun Country of OriginUnited Kingdom
AED 170.59 ($46.48)
(AED 179.12 ($48.81) inc tax)
In stock
+ −
Save 23%
Ezoiz Whatsapp Digital Card
0.0
Revolutionize customer communication effortlessly with Ezoiz's WhatsApp NFC Card – a seamless solution for service providers and customers alike. This cutting-edge card simplifies information-sharing with a single tap, opening a pre-programmed WhatsApp chat without the need to save numbers or...
AED 185.00 ($50.41) AED 142.86 ($38.93)
You save: AED 42.14 ($11.48) (AED 150.00 ($40.87) inc tax)
In stock
+ −
Save 23%
Ezoiz Google Review Card
0.0
Increase your business's online credibility effortlessly with Ezoiz's Google Review NFC Card. This cutting-edge solution redefines the customer feedback experience. With a simple tap, customers can express their satisfaction by leaving 5-star ratings on prominent platforms such as Google,...
AED 185.00 ($50.41) AED 142.86 ($38.93)
You save: AED 42.14 ($11.48) (AED 150.00 ($40.87) inc tax)
In stock
+ −
Save 23%
Ezoiz Digital Business Card
0.0
Make a lasting impression in the digital age with the Ezoiz Digital Business Card. Revolutionize your networking experience by seamlessly sharing your professional identity without the limitations of traditional paper cards. Key Features: Contactless Connectivity: Exchange information...
AED 185.00 ($50.41) AED 142.86 ($38.93)
You save: AED 42.14 ($11.48) (AED 150.00 ($40.87) inc tax)
In stock
+ −
End Cutting Plier For Hard Wire Comfort Grips 150mm
0.0
3015-150
Maun's High-Leverage Cutting Nipper is a compact yet powerful tool designed for repetitive hard wire cutting. Its high-leverage design reduces cutting effort while delivering unrivaled cutting performance. Ideal for spring and sprung mattress manufacturers, it effortlessly cuts through various hard materials. Comfortable to use with its soft plastic grips.
Brand NameMaun Country of OriginUnited Kingdom CertificationsBS 3087-7:1996, ISO 5747:1995
AED 141.52 ($38.56)
(AED 148.60 ($40.49) inc tax)
In stock
+ −
End Cutting Plier For Hard Wire 150 mm
0.0
3010-150
Maun's High-Leverage End Cutting Nippers are the perfect solution for repetitive cutting of hard wire. With their compound-lever action and precision-ground cutting-jaw edges, they offer unrivaled cutting performance. Ideal for spring and sprung mattress manufacturers and various metal fabrication operations.
Brand NameMaun Country of OriginUnited Kingdom CertificationsBS 3087-7:1996, ISO 5747:1995
AED 128.89 ($35.12)
(AED 135.33 ($36.87) inc tax)
In stock
+ −
Electric 60W Air Ventilation Single Phase Fan Motor YDK120 Series
0.0
YDK120-60-6-1
Get the electric 60W YDK120 Series fan motor for split air conditioning systems from MEP Global. With excellent insulation and overheating protection, it guarantees smooth operation, low temperature rise, small vibration, and low noise.
Brand NamePower Motors ColorGray Country of OriginChina FeaturesClockwise Rotation, 1 Pole, 6 Pole, Single Shaft Voltage & Frequency1 Phase
Contact us for a price
In stock
Duct Mount
tembo
0.0
TGDM0S0000025
Ensure vibration-free operation with our Duct Mount Anti-Vibration Isolator. Perfect for fan coil units, pipes, ducts, brackets, and light-weight equipment. Customizable sizes available.

Rated Load (KG):

25 50 100
Brand NameTembo Country of OriginIndia Rated Load (KG)25
Contact us for a price
In stock
Drop in Anchor, Electrogalvanized
tembo
0.0
TGDPA000E0625
The Drop-In Anchor is a low profile, female threaded anchor designed for fixing threaded rods or studs in ceilings or concrete slabs. Made from durable mild steel or stainless steel, these anchors provide excellent strength and stability. The electrogalvanized finish enhances corrosion resistance.

Size Nominal (Inches):

M6 X 25MM M8 X 30MM M10 X 40MM M12 X 50MM M16 X 60MM
Brand NameTembo MaterialMild Steel Size Nominal (Inches)M6 X 25MM
Contact us for a price
In stock
Draw in Anchors, Electrogalvanized
tembo
0.0
TGDWA00E00650
MEP-Global offers a selection of reliable and durable draw in anchors for secure fixings in concrete and other materials. These heavy-duty metal fixings are designed with large bolts that are anchored in a metal housing or shield. They provide exceptional strength, stability, and load-bearing capacity for a wide range of applications. Choose from sizes starting from M6 up to M24 to suit your specific requirements. Our draw in anchors are available in materials such as mild steel and stainless steel, ensuring durability and corrosion resistance. The electrogalvanized finish further enhances the longevity of the anchors. Trust MEP-Global for high-quality draw in anchors that deliver reliable and long-lasting performance.

Size Nominal (Inches):

M6 X 50MM M8 X 55MM M12 X 90MM M10 X 65MM
Brand NameTembo Country of OriginIndia MaterialMild Steel Size Nominal (Inches)M6 X 50MM
Contact us for a price
In stock
Dielectric Union FPT X MPT,180°F (82°C), 25 bar (362 psi), Electrogalvanized
tembo
0.0
TGDEUFM000042
Connect female NPT iron pipe thread to female brass pipe threads with our reliable Dielectric Union. Constructed with durable materials for high-temperature and high-pressure applications.

Size Nominal (Inches):

1-1/4" 1/2" 3/4" 1" 1-1/2" 2"
Brand NameTembo Country of OriginIndia Size Nominal (Inches)1-1/4"
Contact us for a price
In stock
Dielectric Union FPT Steel X FPT Brass, 180°F (82°C), 25 bar (362 psi),Electrogalvanized
tembo
0.0
TGDEUFF000022
Connect female NPT iron pipe thread to female brass pipe threads with our reliable Dielectric Union. Constructed with durable materials for high-temperature and high-pressure applications.

Size Nominal (Inches):

1/2" 3/4" 1" 1-1/4" 1-1/2" 2"
Brand NameTembo Country of OriginIndia Size Nominal (Inches)1/2"
Contact us for a price
In stock
Dielectric Union FPT Steel X FPT Brass Weld,180°F (82°C), 25 bar ( 362 psi), Electrogalvanized
tembo
0.0
TGDEUFW000022
Connect female NPT iron pipe thread to female brass pipe threads with our reliable Dielectric Union. Designed for weld connection and built for high-temperature and high-pressure applications.

Size Nominal (Inches):

1/2" 3/4" 1" 1-1/4" 1-1/2" 2"
Brand NameTembo Country of OriginIndia Size Nominal (Inches)1/2"
Contact us for a price
In stock
Show another 59 products
Verobiz LLC
Verobiz LLC

Verobiz LLC is a team of professionals with over 20 years of expertise in the sector with the knowledge of widest range of products and services. Over the years our team has...

Extra

Ask a question
Vendor filters
Distance to Vendor

Search nearby 10 km

  • ‎0 km
  • ‎700 km
Vendor's City
Type
Compressor Manufacturer
Compressor Model/Family
    Show all (150)
Puch Diameter
Spare Parts Type
Type
Type
Type
Price

$  –  $

  • $0
  • $916
Type
Type
Brand
    Show all (15)
Colors
Free shipping
Capacitor Shape
Capacitor Type
Equipment Type
Features
    Show all (7)
MFD/UF
Voltage & Frequency
    Show all (7)
Mechanism
Mounting
Application
Airflow